VIDGA Corner piece, single track, white
VIDGA Corner piece, single track, white
VIDGA Corner piece, single track, white
VIDGA Corner piece, single track, white
VIDGA Corner piece, single track, white
VIDGA Corner piece, single track, white
VIDGA Corner piece, single track, white

Create a cozy canopy or place the track with corner connector close to a window to block all light for a good night’s sleep. VIDGA curtain rail system gives you more flexibility and less complexity.

Article Number402.990.98

Product details

Makes it possible for curtains to go around corners.With a corner piece finishing each end of the rail, curtains can keep the light out on the sides too.To be mounted with the connector enclosed with the curtain rail.Includes: 1 corner piece (track length: 4¾") and 1 end cap.Designer

David Wahl

Article Number402.990.98
  • Aluminum, Epoxy/polyester powder coating
    Wipe clean with a dry cloth.
  • VIDGACorner piece, single trackArticle Number402.990.98
    Width: 3 ¼ "Height: ¾ "Length: 7 ¾ "Weight: 3 ozPackage(s): 1

Product size

Track length: 
4 ¾ "

Reviews

3(6)
No hanging materials included.SHELLYThis product came with no hangers and didn’t state that in description. Also a real pain to install with straight track. Track curve doesn’t fully line up with straight track either so curtains catch sometimes.2
Measure it firstMatt94I agree that there needs to be measurements given from ikea but if you put up the main track first then attach the corner piece it will be much easier. If you need to cut the track, buy the miter box. It gives you a much better cut so the gliders will slide through the corner easier.5
Instructions need more detailWaconiaGalThere needs to be a wall bracket installed at each end of a corner piece, whether being used as an inside or outside corner. And it needs to be installed in the proper location because there will most likely be a straight rod piece connecting to at least one end. The instructions do not say how far away from the wall's corner the wall brackets need to be installed. The instructions need to include the number of inches and centimeters. You think you can easily figure it out by holding the corner piece up, but you'll likely be wrong. Place the corner off-center and the ends of the attached straight pieces won't parallel the walls. IKEA -- Add some wall-corner-to- end-of-corner-piece dimensions. Have them for the 2 projection wall bracket and the 4-3/4 projection brackets as they will be different. Not having the dimensions turned a 2 hr job into a 6 hr one.5
GOOD product - terrible instructionsKLouI've hung two whole VIDGA curtain rod systems and love them. But beware, the instructions that come with them might as well be in Greek. Look on YouTube for better instructions -- the IKEA video there is fantastic.4
Preferred the older modelSeejayI bought this just because I didn’t have a choice they did not carry the 3 track curved units anymore. When I got there the girl said they never carried that kind but I physically brought mine and she all said was “oh that’s the old model” and this model is expected to stay put when u just anchor it with plastic. It doesn’t stay it falls off and it doesn’t come with a end so the stuff won’t slide off1
vidga corner piecejoe pthis system is terrible, took all day top cut and put in corner piece. Plus if u cut the rod not perfect the curtains won't slide.1
VIDGA Corner piece, single track, white

Let’s get lost in layers

With layer upon layer of different types of curtains, you can turn your window into a cozy and constantly changing scene. It’s beauty that also serves practical functions - the curtains can be drawn to and from as necessary to adjust the light, sound, temperature and privacy. Let these solutions guide you towards getting the weekday escapes you want.

Product development engineer Martin Bo Zhang has worked with curtain rails for more than a decade. He uses lots of gestures and body movements when he talks. Martin lifts both arms over his head like a ballerina. He's showing how hard it can be to keep a curtain rail in place while assembling it at the same time."There are 30-50 small screws," Martin says. He brings his thumb and forefinger together, leaving space for a grain of rice. "This small." He keeps one arm up and reaches toward the floor with his other arm. "If a screw falls on the floor, you can't find it," he explains, "and good luck if you have a high pile rug." So how did Martin, designer David Wahl and a team of many at IKEA figure out how to improve curtain rails? First, they researched what customers and co-workers said about curtain rails that had been returned. They had workshops with lots of IKEA colleagues, too. Then they started looking at anything and everything but curtains.

A concept that clicked

Buckles, belts and sports equipment—that's where David and the team got some unexpected ideas for VIDGA curtain rails. "By looking at solutions from different fields of products, you can get inspired to find new ways of solving problems," he explains. That's how the team came up with the concept for VIDGA to click together using as few tools as possible. And there aren't any rice-sized screws to lose. "You still put it together yourself," Martin says, lifting an arm into the air like he's holding a curtain rail against a wall. "But you don't need to spend an hour and a half with your arm like this." So now you know how customers and clicks helped improve curtain rails. That just leaves the robots.

Bring in the robots

Where are the robots, exactly? About an hour north of the IKEA home base in a town called Åseda with a population of roughly 2,500. A supplier there won the worldwide bid to produce VIDGA curtain rails, built a new factory and hired more than two dozen new employees. "Going from talking about the small things to being in the factory, looking at the conveyors going around the robots continuously working, is a mind-blowing experience," Martin says.

The team was able to automate production with the robots because they designed every piece of VIDGA from scratch. In fact, since nothing like VIDGA exists on the market, we're applying for a global patent for the whole system—a rare step for IKEA. Will you need to call in a high-tech robot to assemble VIDGA curtain rails for you? Nope. You'll just need a simple allen key. Sometimes a better everyday life starts with a click.

Three layers of temperature

Did you know you could adjust the temperature with curtains and blinds? A honeycomb structure of the HOPPVALS blind creates a layer of insulation, keeping your room warmer during the colder season and cooler in the warmer months.

Gently down the corner

A layered curtain solution allows you to fine-tune light, sound, temperature and style in a personal way. And, the amount of privacy or openness you want, is always just around the corner.

Just relax in layers

We all need a place to revitalize at the end of a long day, before the next morning. With three layers of light filtering and mood setting curtains and blinds, you can adjust your bedroom window to whatever you need.

Night shift

Need to catch up on some sleep? Change your bedroom from daylight to complete darkness with an inner layer of block-out blinds. A thick curtain on top brings soothing coziness and dampens sounds around you.

Because, it’s just safer

We believe children are the most important people in the world. Therefore, we adapted our range of blinds and curtains to make your windows as safe as possible. We spent four years coming up with alternatives, and where we couldn’t, we simply removed the product from our range. So now all IKEA blinds are completely safe for your kids. Goodbye cords, hello peace of mind.

How to measure your windows for curtains

Part of the secret to creating really beautiful, easy layered solutions is making sure your window is properly measured. 1. The width of your window (a) This determines the width of your curtain rod or track rail. Add at least 5¾" on each side to allow the curtains to cover the window properly and open completely. 2. The length of your curtains (b) This determines the length of your curtains or panel curtains. Measure from the top of the window frame and stop where you want your curtains or panel curtains to end. As a rule of thumb, add 5¾" to the measurement. Mount the curtain rod or rack rail 5¾" above the window frame.

Read MoreRead less

Designer thoughts

Designer thoughts

”When mounting curtain rails myself, I’ve often thought about how it could be made simpler so when I got the chance to create VIDGA curtain rail system, I knew what I wanted to do. The new system needed to look good, and be as easy to understand as to mount with just a few tools. And I am very pleased with the outcome! I’m sure you’ll like the end result, when all your curtains or panel curtains are in place.”

VIDGA Designer thoughts

VIDGA
Corner piece, single track, white

Last chance to buy
$4.00
Available for delivery in select locations
Checking stock
VIDGA Corner piece, single track, white

VIDGA

$4.00