A garden dining chair made of durable aluminium to enjoy for a long time. Add a cushion in a favorite color to enhance the personal look and seating comfort. Fits perfectly with SJÄLLAND dining tables.
The chair is easy to store when not in use, since you can stack up to 6 chairs on top of each other.
You can make your chair more comfortable and personal by adding a chair pad in a style you like.
The materials in this outdoor furniture require no maintenance.
Easy to keep clean – just wipe with a damp cloth.
The furniture is sturdy, lightweight and maintenance-free, as it is made of rustproof aluminum.
May be completed with FRÖSÖN/DUVHOLMEN, KUDDARNA or HÅLLÖ chair cushion (17x17").
Product is possible to recycle or use for energy recovery, if available in your community.
Front leg/ Back leg/ Seat frame/ Seat/ Back:
Aluminum, Polyester powder coating
The best way to extend the life of your outdoor furniture is by cleaning it regularly and not leaving it outdoors unprotected more than necessary.
Clean: Use a mild soapy solution.
Maintenance: Require no maintenance.
Storing: If possible, store in a cool dry place indoors. If the furniture is stored outside, cover it with a waterproof cover. After a rain or snowfall, wipe off excess water or snow from flat surfaces. Allow air to circulate to avoid condensation.
This chair has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 581.
We want to have a positive impact on the planet. That is why by 2030, we want all materials in our products to be recycled or renewable, and sourced in responsible ways.
Very good quality chairMARKVery good quality chair5
Love these patio chairs! Comfy,AnnettaLove these patio chairs! Comfy, attractive and weather friendly.5
Most difficult ikea item I’ve assembledTiba O.Holes don’t line up and I had to hammer so many in! It’s a sturdy set but took hours to complete. I wouldn’t buy again.2
Very nice chairs! Just whatmaria a.Very nice chairs! Just what I wanted !5
Great chairNoelFast assembly and holding up well outdoors. I've only had it a few weeks but so far no complaints.5
Sjalland chairJanetLike the look5
defiantly a well made chairMichaeldefiantly a well made chair for the price. the only drawback I have noticed is when shacking and unstacking they rub a lot on the finish. I'm hoping that it doesn't ruin the finish over time.4
Very sturdy yet light weight chairBarbaraThis is a very sturdy yet light weight chair and looks attractive. I purchased it for my Dad who has started having trouble getting up out of chairs. The handles give him the stability he needs.
A bit tricky assembling. I had to redo it because I was overconfident and didn't follow the instructions. The correct side matters.5
FlawedPeanut1This is a nice chair and not too difficult to build. The caps that go on the tops of the back tubes are badly designed however. Not one — out of eight — went into the the tube snugly and securely. A small tab broke off each one and they just fit loosely. I had to seal them with silicone.2
well madeozzievenThis chair (with the cushion) is very comfortable. Quite sturdy and very well made.5
GREAT LOOK!awesome ggLove the color combination, my fussy for comfort husband says it is comfortable, so it's a 10!5
Difficult to assemble but attractive and sturdyTaarbaekpigenOnce assembled the chairs were sturdy and attractive. However, it was time consuming. There were two problems -- the difficulty in having the bolt that attaches the arm to the side and socket,-- the plastic caps on top need a better prong to hold in position.4
Most difficult Ikea product to assemble -but nice.TaarbaekpigenOnce assembled this was a wide comfortable chair. However, after buying Ikea products for over 50 years I can say that this was the most difficult assemble. There were two areas of concern. The first, was the bolt that attached the arm to the side of the chair...it was difficult to grasp the socket. The second, was the plastic caps prongs on top of the chair. They needed to be longer to stay in place.4
Nice patio chairMommamitchI bought two of these chairs several weeks ago. Assembly was fairly easy. It is nice to have these on my patio with the little table I purchased.5
3 good, 1 defectiveSSSSBThese chairs were awkward to assemble, but one of them had poorly formed boreholes. Installing the caps on top was impossible without breakage. We called customer service and will have to superglue. It will look fine, but I do not recommend these given the low quality. The matching bench also had a defective bolt. There’s some quality control on this model; I do not recommend.3
Stylish and comfortableGreenbelt galStrong and stylish! These chairs look great around my outdoor dining table. They assesmble very easily. I also bought the chair pads that were shown with them.5
Nice chairikea_radSturdy, lightweight, and great looking. Assembly was a breeze.5
Great!!!IKEA fan2019All my family love it! We bought it since they have it.5
Stylish and comfortable!MMBNYEasy to assemble, looks chic in my urban garden. Got the whole Sjalland set -- two benches, 2 armchairs and table. Love it all. Very sturdy and not so difficult to assembly - Really! I've had many compliments from visitors.5
Featured on Instagram
Check it out! Some of our #ikeausa followers tagged #
Sometimes things don’t go the way we expect when we create our products. Like with SJÄLLAND outdoor furniture. When we were almost ready with the development and thought we had straightened out all the question marks, our own designer didn’t manage to assemble one of the products the right way. Yes, we’re blushing a bit, but this blunder turned out to be a good thing.
When we want to move life to the garden or the balcony we shouldn’t have to worry about fixing up the outdoor furniture too much before we can relax and go ah… And it ought to be simple to fit the furniture back into crammed garages or under covers when the warm season is over. To get the care-free chairs and tables that most of us appreciate, we created SJÄLLAND. But, when David Wahl, the designer, started working with the collection, he didn’t realize that he and the development team were in for a hurdle-race of obstacles.
It looks impossible
One of the first things David put in the design was an armrest on the chairs. It’s made of aluminium and bent two times to create an angle that makes it easier to sit down and get up, especially around a table. It’s also twisted to make the chair stackable. The bends and twists added function, but also created some headache for David’s colleague, Phuong Nguyen Thanh. Phuong was the technician on the team and his task was to make sure that the design and the materials work well together. “When I first saw David’s design I said to myself ‘Oh no, that’s impossible! There isn’t a machine that can bend aluminium like that,’” remembers Phuong.
Problem with bends straightened out
But, the team also felt the bends and twists were worth fighting for. And many people think armrests are really comfortable – so they decided to push on with the design anyway. “Our suppliers adjusted the machines they had to get the armrest just right. The first prototype turned out quite ugly to be honest, but nearly 30 trials later we managed to nail it,” laughs David.
Hmm, should we really mention this?
When the team finally had most things in place, David made one more discovery. “It’s a bit embarrassing, but I assembled the table incorrectly,” he says. “I took a picture of it, sent it to the team and said ‘Hey, I found a way to put it together the wrong way!’ I think they assumed that I had tested the construction, but I just wanted to see what it looked like with all pieces in place. The table is not hard to assemble, my mind must have been elsewhere, and to my defense I didn’t have the assembly instructions at hand,” confesses David.
The good part about the problems the team faced, is that they all led to improvements. The chair became stackable, and the assembly instructions super-clear – so no one needs to experience what David did. “It’s actually problems like this that we like. They make us better, and in the case of SJÄLLAND, they also make outdoor life easier”, says David.
Aluminum is a very durable, weather-resistant and long-lasting material, with naturally built-in rust protection. It is light-weight and easy to care for since it is maintenance-free.