A bold expression made with dark wooden finish and visible grain pattern. This solution covers your essential needs from roomy drawers to water-saving faucet. An easy match with many colors and styles.
Great value for money and guaranteed to outlast at least 10 years of everyday use. Read about the terms in the guarantee brochure.The dark wooden expression with visible grain pattern creates a warm, tactile feeling. It makes a statement but is easy to combine with other furniture in the room.The drawers are protected from water damage thanks to a smart production technique. Foil is wrapped vertically around the particleboard so there are no unprotected edges where water can penetrate.Cleaning the floor is a breeze since this solution is wall mounted and there are no legs that get in the way.The smooth-running drawers with pull-out stop, open all the way for a good overview without falling out.You can sense the calm every time you close the drawers thanks to the soft-closing mechanism. No worries about fingers getting trapped.The deep bottom drawer has space for larger things like towels and hairdryer. The top drawer is suitable for smaller items like brushes, creams, sprays and accessories.You can make good use of the space inside the drawers thanks to the smart design of the water trap that leads the piping into the far back of the cabinet.The simple construction makes the drawers easy to assemble.Smooth, durable and easy-to-clean ceramic sink with space for toothbrushes, soap dispenser and other smaller things on the wide edges.You save water and energy every time you lift the lever of the faucet thanks to the aerator device that prevents unnecessary use of water.Designer
IKEA of Sweden/Magnus Elebäck
Sink cabinet with 2 drawers
Frame/ Back rail:Particleboard, Plastic foil, Plastic edging
Wipe dry with a clean cloth.Wet marks should always be dried off as soon as possible to stop moisture penetration.Wipe clean with a water dampened soft cloth and a mild non-abrasive dish detergent or soap, if necessary.Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the sink.
SinkThe material in this product MAY BE recyclable. Please check the recycling rules in your community and if recycling facilities exist in your area.
Bath faucet with strainerBy creating all our faucets and showers in a way that helps people use less water and energy, we contribute to enabling a more sustainable life at home.
This product comes as 4 packages.
GODMORGONSink cabinet with 2 drawersArticle Number:704.578.83This product has multiple packages.
Great VanityJuanG22Great Vanity. For all floating vanities unless you have a concrete block wall you need to reinforce the wall before installing it. Attach the vanity only to the studs even though they are wood is not enough. Or you can use legs...5
Nice looking vanity - Very bad mounting designredingtonrayDesigner, you wiffed on the mounting design of this cabinet. There are 4 tabs in the back corners for mounting directly to a wall to give the vanity a floating, or cantilevered appearance. the tabs are approx 39 inches apart horizontally. Wall studs are 16 inches apart in construction. It's impossible to have the brackets attached to two wall studs simultaneously. So, unless you have unlimited space to mount the unit and don't have to worry about it being off center, you can mount the tabs from one side to a at least one stud only. Because of the size of the bathroom I have, (and wanting the vanity to be centered on the wall) I had to forgo the tabs and drill and insert lag bolts through the upper back of the unit and into the wall studs that are 16 apart. Here's the big problem with that: there's only one cross bar that you can mount this thing to the wall with and it is about 4 inches below the top of the cabinet in the rear ( and it is pretty much just particle board with a vinyl veneer attached to the sides with only 4 cams and and a couple of dowels). Soooo when the extremely heavy sink is attached to the top of the vanity it actually pulls the sink away from the wall at the top. I tried construction adhesive but the vanity and sink were way too heavy. So, I'm going to have to order the legs that go on the front to support this monster from falling off the wall. If I knew I would have to use legs I wouldn't have bought this in the first place and would have went with a different manufacturer with a better mounting design. So, If you are buying this, you better go ahead and order two legs along with it because you will need them. I don't see any way around it. I also have to modify the plumbing in the bathroom to use this but that's just bad luck on where this thing mounts and not IKEA's fault.2