8 ESPEVÄR images
Skip images

ESPEVÄR Slatted mattress base for bed frame, dark gray,

Price $ 170.00
Mattress and bedlinens are sold separately.
Product features
Washable cover

How to get it

A mattress base has two big advantages. It makes your bed higher and it helps your mattress keep its shape longer by distributing your body weight, providing extra support and lightening the load.

Article Number691.566.02

Product details

Easy to transport, as the mattress base comes in a flat-pack.

The solid wood slats provide good support for the mattress and allow air to circulate.

Easy to get in and out of bed because the mattress base makes the bed higher.

Gives your bed a color coordinated look together with HÖVÅG active-response coil mattress.

Easy to keep clean since you can remove the cover and wash it by machine.

Designer

IKEA of Sweden

  • Mattress and bedlinens are sold separately.

    ESPEVÄR foundation and ESPEVÄR cover are included in the price but packaged separately.

    This product combination has parts with different limited warranty conditions, you can find more information about these in the limited warranty document on IKEA-USA.com.

  • Material
    Cover
    Top part/ Top:
    60 % cotton, 40 % polyester
    Ticking/ Ticking:
    64 % cotton, 36 % polyester
    Comfort material:
    Polyester/viscose (rayon) fiber wadding
    Lining:
    Non-woven polypropylene
    touch and close fastening tape:
    100 % nylon
    Mattress base
    Bed base frame/ Center support beam:
    Solid pine, Solid spruce
    Bed base slats:
    100 % polyester, Solid pine
    Care
    Removable coverCover

    Machine wash warm, normal cycle.

    Do not bleach.

    Do not tumble dry.

    Iron high.

    Do not dry clean.

Measurements

Length: 74 3/8 "

Width: 38 1/4 "

Height: 7 7/8 "

Mattress length: 38 1/4 "

Mattress width: 53 1/8 "

  • This product comes as 2 packages.
    ESPEVÄRArticle Number003.079.91

    Width: 14 ½ "

    Height: 2 ¾ "

    Length: 22 "

    Weight: 2 lb 12 oz

    Package(s): 1

    ESPEVÄRArticle Number103.079.19

    Width: 8 ¾ "

    Height: 7 ¾ "

    Length: 81 "

    Weight: 74 lb 15 oz

    Package(s): 1

Reviews

Does the job for now.Elissa Z.Have had this with a full size Sagstua bed frame for 3 years now. While I love my bed, this slatted frame is merely ok. It does its job of holding up my mattress I suppose. I’m on the heavier side, and two of the slats have broken so far. They also shift a lot, even though it has the stoppers to keep the slats in place. I’m thinking I’ll have to bolt each individual slat to the base and see if that helps.3
Excellent Sturdy Bed FrameSunilkumarThis product is best priced and pretty sturdy. Only one care you need to take is the height of the mattress. A 14" or higher will make the sleep level too high. Or in the Assembly self pickup item do not buy the piece hardboard under the mattress.5
Excellent! Easy to Assemble.AngelaEasy to Assemble ! Works really well- supports mattress well.5
Espevar works as expectedKarlaWe bought a new mattress, needed a new foundation for it and bought the Espevar. It required two people to assemble easily and put on the provided cover. It is noiseless on the bed and provides great support under the mattress. We would buy again.5
love the twin bedsHONEYlove the twin beds5
Good sturdy productDavidGood sturdy product5
Very sturdyLESAPurchased to replace a very old set. Quite satisfied, especially for the money!!5
Very nice, great fit onWayneVery nice, great fit on bed frame5
Ideal for our bedALEXANDER D.We bought this to fit into an Ikea SONGESAND bed which we've had for about a year and up till now, we’ve been using an older box spring and pillow-top mattress. We ordered a new hybrid mattress (not Ikea) requiring a slatted base and felt this would be ideal. There was no need to buy legs, including the central one shown on the instructions, as our bed has the $15 SKORVA steel center beam installed. We assembled it in another room, including slats (easy) and the cover (not so easy), before carrying it sideways to the bed. Before ftting the slats and cover, decide the final height of your mattress, to determine which sets of slat rails to use, which will then indicate the top. When fitting the cover, ensure that each vertical seam is aligned half-way around each curved corner, then stretch it tight. Tip up the base on one side to get the Velcro strips matched up then do the other side. It fits perfectly into our bed unit and sits about 2.75 inches above the wooden surround.5
We have purchased five ofTAMMYWe have purchased five of these. We love them.5
Easy to transport and assemble.GloriaEasy to transport and assemble. Color very appealing.5
Perfect for replacement for a bed frameLORELIEI wanted to replace my metal bed frame so my dogs couldn't get under my bed. So I purchased espevar and it is perfect. I covered it with a black fitted sheet. Also cover my original boxspring with a fitted sheet. Looks great5
Cuando vendieron el producto habíaDavidCuando vendieron el producto había que comprar otra pieza por separado y ahora ni la tienen y tuvimos que hacer adaptaciones al box2
A good support optionPETERA SOLID foundation that provides much better support than slats.5
GoodJamesIt was great to put together. Again instructions are the best.4
Strong and easy to assemble.PraneethStrong and easy to assemble.4
Box was incredibly heavy, but great productBrian W.Bought this because we got a bed frame from Ikea and this was suggested as part of it to be a mattress base. Also, we have a crossover style SUV and a pre-assembled box spring or mattress base would never fit in our car. The box this comes in (Queen size) was unbelievably heavy. Like, frustratingly and annoyingly heavy.. should be in two boxes, but it will definitely need to people to lift unless you unbox the parts before carring it inside. Assembled it myself in about 45mins. There are reviews here saying they "didn't install the middle beam" but that the mattress was sinking... DUH, that's what the middle beam is for. Use it! Just pay close attention to the directions; anyone complaining about them didn't take time to just LOOK at them carefully. Very simple. Memory foam mattress seems very solid and sturdy on this, no sinking. It's expensive, but convenient. Would suggest.5
Best bed base ever!CHARLENE M.This thing is rock solid. I love it and have bought two. You don’t need a dust ruffle as the colored covers are nice and tailored, and you can choose your own leg height. I have it pushed up against a hefty Crate and Barrel headboard and it’s beautiful. I’m not sure what people are talking about in the bad reviews, as you only need to have a normal mattress to lay on top. Everything is flush. I suspect they did not assemble it properly. I have a Queen and do not use the extra support leg for the middle, and again this box doesn’t budge, or squeak. If you need the support leg, don’t forget to buy it separately. — I hate bed frames that require a box spring. It’s hard to tuck covers down the sides; dust, dog hair, socks, and crumbs get stuck in crevices; I’m always knocking my shins on the corners; and moving the whole bed in order to clean is nearly impossible. Espevar doesn’t cause me any of these issues. I hope you never discontinue this item. Yes, I’m passionate; it’s that good.5
Bed foundationMICHELLELove the option of having a foundation with the king sized bed.5
Nice!IRENEVery easy to setup, great materials, and the best part is the transportation. It fitted in my car without issues :)5

Material

What is cotton?

Cotton is one of the world's most appreciated and used natural fibers. Textiles in cotton are soft, hardwearing and can be washed at high temperatures. They are also good at breathing and absorbing moisture – making them pleasant to wear close to the body. Today at IKEA we use more and more recycled cotton and strive to make sure that all the new cotton we use has been grown and produced with less and less amounts of pesticides, fertilizers and water.