DALSKÄR Wash-basin mixer tap with strainer, chrome-plated
DALSKÄR Wash-basin mixer tap with strainer, chrome-plated
DALSKÄR Wash-basin mixer tap with strainer, chrome-plated
DALSKÄR Wash-basin mixer tap with strainer, chrome-plated
DALSKÄR Wash-basin mixer tap with strainer, chrome-plated
DALSKÄR Wash-basin mixer tap with strainer, chrome-plated
DALSKÄR Wash-basin mixer tap with strainer, chrome-plated
DALSKÄR Wash-basin mixer tap with strainer, chrome-plated

You save hot water and energy every time you lift the lever. The cold start function avoids the unnecessary use of hot water for daily rituals like washing your hands or brushing your teeth.

Article Number602.812.95

Product details

10 year guarantee. Read about the terms in the guarantee brochure.The cold-start function prevents hot water waste and saves energy. When you lift the lever straight up, only cold water is released. The function restricts opening the lever fully to the right.Hot water is released by turning the lever to the left. It is only then that hot water is consumed.This is a durable mixer tap that you can use for many years, since the hard, ceramic discs withstand the friction that always occurs when you change the temperature of the water.Chrome-plated brass is a hard and durable surface that is easy to clean.An aerator integrated in the tap keeps the water flow just right while less water and energy is used.Strainer is included.Water and energy saving aerator (5.7 l/min.) for high-pressure systems included.Additional aerator for low-pressure system included.Connection hoses that fit 15 mm diameter pipes are included.A tool is included that makes it easy to install the mixer tap in place.Tested and certified to relevant European mechanical, quality, safety and hygienic standards, including WRAS or KIWA UK.The wash-basin mixer tap can be used in high and low-pressure systems. Tested to manage a pressure of max. 10 bar (1000 kPa). Recommended working pressure: 0.2 - 5.0 bar (20 kPa - 500 kPa).Max. temperature hot water system 80°C/176°F.Spare parts are available to prolong the life of your product. For more information, contact IKEA Customer Services at your IKEA store or IKEA.com.If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.Fits IKEA wash-basins and standard wash-basins from other manufacturers.Designer

Magnus Elebäck

Technical information

DALSKÄR

Wash-basin mixer tap with strainer

Type of mixer tapWash-basin mixer tap
Applicable product standardsEN 817
Max. flow rate at 3 bar5.5 l/min (1.5 gpm)
Max. static pressure10 bar (145.0 psi)
Tested up to a max. static pressure16 bar (232.0 psi)
Min. working pressure1 bar (14.5 psi)
Recommended working pressure1-5 bar (14.5-72.5 psi)
Max. hot water temperature80˚C (176˚F)
Recommended hot water temperature60-65°C (140-150°F)
Recommended cold water temperature10-15˚C (50-59˚F)
Connection hoses length450 mm (17 3/4 '')
Hose connection sizeG1/2"
Max. countertop thickness50 mm (2'')
Mounting hole measurement34-37 mm (1 3/8-1 7/16”)
Noise levelI
Strainer includedYes

Product size

Height: 
18 cm

Reviews

2.3(3)
Do not purchase these tapsDalskar1I purchased a Dalskar mixer tap from IKEA, Belfast earlier this month to replace an existing tap. I removed the basin from the wall to assist removal of the existing tap and waste fittings and then installed the new tap and waste unit before refitting the basin to the wall. I then proceeded to connect the tap flexible water pipes to my isolation valves to find that that they had compression fittings which were incompatible with UK isolation valves. I rang the IKEA customer service team and after a 20 minute wait I was put through to one of your agents who clearly did not understand the problem and eventually suggested transferring me to a kitchen expert. The line went dead so I had no choice but ring the customer service team again. Got through eventually after another 20 minute wait and this agent went through the instructions with me. We established that the specification of the flexibles varies throughout the world and is different depending on whether you purchase the flexibles in England or Ireland. This agent could not help me any further but supplied me with 2 telephone numbers so that I could speak to someone you may be able to help. One number took me back to the customer service team and the other number was not in service. I eventually decided to go to a local plumbers merchant and purchased new flexibles and fittings to allow me to install the tap to my water supply. I then proceeded to connect the waste fitting to my house waste pipework to find that the fitting supplied with the tap was not compatible with a standard UK basin U bend. Went to a plumber merchant again but this time they could not supply any fittings which were compatible with the IKEA waste outlet. I purchased some standard waste pipes and connections and made up a U bend which I could connect to the IKEA waste outlet. Total cost of tap, replacement fittings and labour ~ £200.1
Rubbish!DDDDCCCould not get only a trickle of hot water out of the tap. Apparently this not suitable for our water system but did not recall anything on box to warn of this2
Wash Basin mixer tapUnkown2The tap works well. No disappointment thus far.4

SustainabilityPeople and planet

Sustainable life at home

Water-conscious commitment in bathrooms

Every time you brush your teeth or wash your hands, you can help save water. A small aerator in every one of our bathroom mixer taps reduces water flow while maintaining pressure.
DALSKÄR Wash-basin mixer tap with strainer, chrome-plated

Water-conscious commitment in bathrooms

Every time you brush your teeth, wash your hands, shave or take a bath, you can help with something essential – saving water. That’s why all our taps have an aerator that saves water and energy while keeping the water stream just right. But that’s just a small part of a bigger effort: conserving more clean water than we use.

Antony Smith, an engineer from England, remembers when he joined IKEA and the small team that develops our taps and showers. "I realized we practice what we preach about sustainability," Antony says. "It's a refreshing experience, but it makes our job really difficult because we genuinely have to deliver on sustainability with each product."

Water is precious, but often taken for granted

So, why conserving water? Because no organism on earth can survive without it, and no new water is created. It's constantly recycled, but our freshwater supply is overused and not evenly distributed. It’s impacted by pollution, contamination and climate change, too. "Those of us who live where you can just turn on your tap may not think about saving water; it's taken for granted," Antony says.

Thinking about water at every step

Behind the scenes, we constantly explore new ways to improve water efficiency. That includes providing factory workers and their families with fresh drinking water, ensuring all factory water is cleaned before release, reducing water usage in textile production and using rainwater to flush toilets in stores. And now we are working on new taps using sensors and spray technology – and new water-efficient showers – to save even more. Every water-saving action adds up.

Read moreRead less

DALSKÄR
Wash-basin mixer tap with strainer, chrome-plated

£65
Available to order online
Checking stock
DALSKÄR Wash-basin mixer tap with strainer, chrome-plated

DALSKÄR

£65