How do I mount a cover panel next to a dishwasher/fridge?
To do this, use a covering panel 220 or 240 cm long that you cut to size. Place the panel with the sawn-off side against the bottom of the worktop.
You can use a cover panel to neatly finish off a kitchen arrangement with a dishwasher at the end.
- Cut the 200 or 240 cm covering panel to the correct length measurement (this is the height from floor to the bottom of the worktop).
- Place the covering panel tightly against the dishwasher. The cut edge will be against the bottom of the worktop.
- Clamp the covering panel between the worktop and the floor.
- Attach the covering panel to the bottom of the worktop with chair corners (available at hardware stores, not available at IKEA).
- If drilling in the floor is not possible then the chair corners can be attached with Construction adhesive
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
Dishwashers and washing machines from IKEA are always on legs. The device should therefore not be placed in a cupboard but between or next to other cupboards.
Read moreIn the assembly instructions of your METOD base cabinet for built-in oven / sink you will find instructions for mounting the cover panel.
Read moreIf you have questions while installing appliances, or want to know which parts you need, you can find your answers here.
Read moreIf your kitchen doesn't connect to the wall or there is space left between two cabinets, use a fitting piece to fill the space. To make a fitting piece, use a covering panel that you cut to size yourself.
Read moreIt is important to us that you are completely satisfied with our products. If you are not, you can make a report to IKEA.
Read moreThe number and type of covering panels you need with your METOD kitchen island depends on the depth of the base cabinets. Below you can read about the different possible combinations.
Read more