Should I use silicone sealant when mounting a worktop or sink?
To prevent moisture damage, we always recommend using silicone sealant when mounting a sink or worktop. This applies to both wooden and laminate worktops. The information about this with image can be found in the installation manual of the relevant article.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
For the METOD base cabinets, screws are included. These can be used to attach the countertop to the base cabinets with your own tools. Wall fittings for mounting your wall panels, silicone sealant, glue, a condensation protector, masking tape, and other (small) tools are not included with the products.
Read moreIn the user manual that you receive with a custom worktop you will find various tips and instructions to keep your worktop beautiful for as long as possible. Failure to follow these instructions can damage your worktop.
Read moreIt is important to us that you are completely satisfied with our products. If you are not, you can make a report to IKEA.
Read moreTo do this, use a covering panel 220 or 240 cm long that you cut to size. Place the panel with the sawn-off side against the bottom of the worktop.
Read moreEverything you need is included in the packaging of your appliance. IKEA does not sell separate accessories for dishwashers.
Read moreDishwashers and washing machines from IKEA are always on legs. The device should therefore not be placed in a cupboard but between or next to other cupboards.
Read more