How do I use the TRÅDFRI shortcut button?
Open the IKEA Home Smart app and go to 'Scenes'. You can easily create a shortcut from there. Before that, you need to pair the shortcut button first.
You can do this by pressing the coupling button on the back of the shortcut button 4 times. Keep the quick release button within 2 cm of the gateway. Press the pairing button (on the back of the remote) for 10 seconds. Then you can set the shortcut in the app.
You can also watch our video explaining how to use the TRÅDFRI shortcut button.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
It is possible that your TRÅDFRI light bulbs are no longer synchronized, for example by switching them on and off manually. You solve this by pressing the button to make the light brighter, until the light sources have the same position. After that, your light bulbs are synchronized again.
Read moreOpen the motion sensor on the back and insert the supplied batteries. Set the pointer to the moon to have the light react to the motion sensor only when it is dark, or set it to the sun so that the sensor always works.
Read moreFor some common problems, we have a suitable solution. Read on for more information.
Read moreTo make installation as easy as possible, you'll find assembly guides for our TRÅDFRI products at the front of IKEA.nl/en. What's more, alongside the installation guides, we've made videos to help you with the installation step by step!
Read moreYou don't need a gateway to control smart devices with the remote control, sensor, dimmer or on-off button. Do you want to use the IKEA Home Smart app to control all your smart devices via your phone? In that case you can choose the gateway in combination with at least one of the four control units.
Read moreRemove the cover from the gateway and use a pin (or something similar) to press and hold the reset button for 5 seconds. While pressed, the three lights flash. If the middle light then flashes 2 times quickly, your gateway has been reset to the factory default settings.
Read more