PAX Corner wardrobe, white, 211/161x201 cm
How to get it
Checking availability...Collect 143 points with
You can change your mind
A deep and spacious corner wardrobe with space for all of the clothes and accessories.
Material
Wardrobe frameFibreboard, Particleboard, Paper foil
Add-on corner unit with 4 shelvesParticleboard, Fibreboard, Paper foil
Clothes rail/ mesh basketSteel, Epoxy/polyester powder coating
Divider for frames- Partition:
- Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Paper foil, Plastic edging, Plastic edging
- Bottom panel:
- Particleboard, Paper foil
- Top panel:
- Particleboard, Paper foil, Plastic edging, Plastic edging
Drawer with framed front- Drawer bottom:
- Fibreboard, Acrylic paint, Paper foil
- Drawer front frame:
- Fibreboard, Paper foil, Plastic edging
- Drawer side/ Drawer back:
- Particleboard, Paper foil
- Inside frame:
- Fibreboard, Paper foil
Pull-out trouser hanger- Frame:
- Fibreboard, Paper foil
- Clothes rail:
- Steel, Epoxy powder coating
Pull-out rail for baskets- Basematerial:
- Steel, Pigmented epoxy/polyester powder coating
- Wheel:
- Acetal plastic
ShelfParticleboard, Paper foil
Care
Wardrobe frame/pull-out rail for baskets/shelf/add-on corner unit with 4 shelves/clothes rail/divider for frames/drawer with framed front/mesh basket/pull-out trouser hangerWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
Assembly instructions
PAX Wardrobe frame704.582.03PAX Wardrobe frame704.582.03PAX Wardrobe frame704.582.17PAX Wardrobe frame704.582.17PAX Add-on corner unit with 4 shelves703.469.32PAX Add-on corner unit with 4 shelves703.469.32PAX Add-on corner unit with 4 shelves703.469.32PAX Add-on corner unit with 4 shelves703.469.32KOMPLEMENT Clothes rail302.568.91KOMPLEMENT Divider for frames602.463.96KOMPLEMENT Drawer with framed front704.466.01KOMPLEMENT Pull-out trouser hanger004.465.34KOMPLEMENT Pull-out trouser hanger304.465.37KOMPLEMENT Pull-out rail for baskets302.632.45Advice and care instructions
PAX Wardrobe frame704.582.03PAX Wardrobe frame704.582.17PAX Add-on corner unit with 4 shelves703.469.32
10 year guarantee. Read about the terms in the guarantee brochure.
You can easily adapt this ready-made PAX/KOMPLEMENT combination to suit your needs and taste using the PAX planning tool.
Adjustable feet make it possible to compensate any irregularities in the floor.
With the PAX Planner, you can easily complete your combination with integrated lighting. After choosing the light source, the planner will work out which accessories you need to complete the solution.
Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.
Two persons are needed for the assembly of this furniture.
The frame can be assembled in an upright position if your ceiling height is a minimum of 202 cm. Follow the assembly instructions in the package.
If you want to complete your PAX frame with a sliding door, the minimum ceiling height required is 205 cm.
The rubber gasket can be installed on either of the two doors in the corner solution, not necessarily on the frame/door it comes with in the package. Note – not to be installed on the door with a handle.
Interior accessories that help you organise inside your wardrobe are sold separately.
The clothes rail holds about 40 shirts on hangers.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Material
Wardrobe frameFibreboard, Particleboard, Paper foil
Add-on corner unit with 4 shelvesParticleboard, Fibreboard, Paper foil
Clothes rail/ mesh basketSteel, Epoxy/polyester powder coating
Divider for frames- Partition:
- Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Paper foil, Plastic edging, Plastic edging
- Bottom panel:
- Particleboard, Paper foil
- Top panel:
- Particleboard, Paper foil, Plastic edging, Plastic edging
Drawer with framed front- Drawer bottom:
- Fibreboard, Acrylic paint, Paper foil
- Drawer front frame:
- Fibreboard, Paper foil, Plastic edging
- Drawer side/ Drawer back:
- Particleboard, Paper foil
- Inside frame:
- Fibreboard, Paper foil
Pull-out trouser hanger- Frame:
- Fibreboard, Paper foil
- Clothes rail:
- Steel, Epoxy powder coating
Pull-out rail for baskets- Basematerial:
- Steel, Pigmented epoxy/polyester powder coating
- Wheel:
- Acetal plastic
ShelfParticleboard, Paper foil
Care
Wardrobe frame/pull-out rail for baskets/shelf/add-on corner unit with 4 shelves/clothes rail/divider for frames/drawer with framed front/mesh basket/pull-out trouser hangerWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
- WARNING! Tipping hazard – this product must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.
Assembly instructions
PAX Wardrobe frame704.582.03PAX Wardrobe frame704.582.03PAX Wardrobe frame704.582.17PAX Wardrobe frame704.582.17PAX Add-on corner unit with 4 shelves703.469.32PAX Add-on corner unit with 4 shelves703.469.32PAX Add-on corner unit with 4 shelves703.469.32PAX Add-on corner unit with 4 shelves703.469.32KOMPLEMENT Clothes rail302.568.91KOMPLEMENT Divider for frames602.463.96KOMPLEMENT Drawer with framed front704.466.01KOMPLEMENT Pull-out trouser hanger004.465.34KOMPLEMENT Pull-out trouser hanger304.465.37KOMPLEMENT Pull-out rail for baskets302.632.45Advice and care instructions
PAX Wardrobe frame704.582.03PAX Wardrobe frame704.582.17PAX Add-on corner unit with 4 shelves703.469.32
This product is made up of more than one component. You can find the details of these components below.
