BROR Shelving unit, with 5 shelves grey-green/pine plywood, 85x55x190 cm
Choose colour:
How to get it
Checking availability...Collect 35 points with
You can change your mind
This storage system is our interpretation of heavy metal – sturdy, durable and flexible. Also easy to assemble, complete as needed and is robust enough to withstand moisture, dirt and heavy loads.
Material
PostGalvanized steel, Epoxy/polyester powder coating
Shelf- Basematerial:
- Pine plywood
- Side rail:
- Galvanized steel, Epoxy/polyester powder coating
Care
PostWipe clean with a soft cloth dampened in water and a mild washing-up detergent or soap, if necessary.
ShelfWipe clean with a dry cloth.
Stains can be removed by using an eraser or fine sandpaper.
Can be treated with oil, wax, lacquer or glazing paint for higher resistance and easy care.
The untreated wood becomes more durable and easier to clean if you oil or wax the surface.
The shelf is perfect for heavy things since it can hold 130 kilos, which is twice as much load as a standard shelf.
The shelving unit is durable, easy to clean and protected from rust since it is made of powder-coated galvanised steel.
You can easily expand your combination if you need more storage by adding on sections and shelves.
If you combine two or more shelving units together, you should use the T-connector to make the combination more stable.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Material
PostGalvanized steel, Epoxy/polyester powder coating
Shelf- Basematerial:
- Pine plywood
- Side rail:
- Galvanized steel, Epoxy/polyester powder coating
Care
PostWipe clean with a soft cloth dampened in water and a mild washing-up detergent or soap, if necessary.
ShelfWipe clean with a dry cloth.
Stains can be removed by using an eraser or fine sandpaper.
Can be treated with oil, wax, lacquer or glazing paint for higher resistance and easy care.
The untreated wood becomes more durable and easier to clean if you oil or wax the surface.
- This storage has been tested for public use and meets the requirements of the following standard: EN 16121.WARNING! Tipping hazard – this product must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.To build a safe and stable section with 190 cm posts, always use at least 4 shelves or 2 shelves and 1 cabinet (drawers do not contribute to the stability of the section).
- 705.473.70
1 × BROR
Post- Width: 6 cm
- Height: 6 cm
- Length: 205 cm
- Weight: 5.23 kg
805.479.115 × BROR
Shelf- Width: 54 cm
- Height: 2 cm
- Length: 85 cm
- Weight: 4.22 kg
This product is made up of more than one component. You can find the details of these components below.
