Choose colour:
How to get it
Checking availability...Collect 36 points with
You can change your mind
All you need to keep the area around the TV tidy. You get lots of storage space and relief from unruly cables. Choose a ready combination or create your own. This is just one of many, many possibilities.
Material
TV bench- Top panel/ Bottom panel/ Side panel/ Partition:
- Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Paper foil, Paper foil, Plastic edging, Plastic edging, Plastic edging
- Back panel:
- Fibreboard, Paper foil, Plastic foil
ShelfParticleboard, Fibreboard, Paper foil, Plastic edging, Plastic edging, Plastic edging, Paper foil
Drawer frame- Drawer back/ Drawer side:
- Particleboard, Plastic foil
- Drawer bottom:
- Particleboard, Plastic foil, Paper foil
Drawer runner, push-openGalvanized steel
Drawer frontParticleboard, High-pressure melamine laminate, Plastic edging
LegSolid wood, Acrylic paint
Supporting legSteel, Powder coating
Care
Drawer frontWipe clean with a damp cloth.
Wipe dry with a clean cloth.
TV bench/shelf/drawer frame/drawer runner, push-open/leg/supporting legWipe clean with a damp cloth.
Wipe dry with a clean cloth.
Check regularly that all assembly fastenings are properly tightened and retighten when necessary.
10 year guarantee. Read about the terms in the guarantee brochure.
The slightly textured surface on the front KALLVIKEN creates a concrete effect.
It’s easy to keep the cables from your TV and other devices out of sight but close at hand, as there are several cable outlets at the back of the TV bench.
The cable outlet at the top lets cables run down smoothly into the TV bench.
We recommend a TV bench to be a bit wider than the TV placed on it. This TV bench suits a TV up to 45 inches. You can choose a larger TV if it’s not heavier than the specified max load for the bench’s top.
The top panel of the TV bench is intended for a TV with a maximum weight of 16 kg.
The push-open function requires a space between the frame and the drawer front to allow the drawer to be pushed to open. The small gap is necessary to allow this function and is not a product deviation.
2 drawers with rails included.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Material
TV bench- Top panel/ Bottom panel/ Side panel/ Partition:
- Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Paper foil, Paper foil, Plastic edging, Plastic edging, Plastic edging
- Back panel:
- Fibreboard, Paper foil, Plastic foil
ShelfParticleboard, Fibreboard, Paper foil, Plastic edging, Plastic edging, Plastic edging, Paper foil
Drawer frame- Drawer back/ Drawer side:
- Particleboard, Plastic foil
- Drawer bottom:
- Particleboard, Plastic foil, Paper foil
Drawer runner, push-openGalvanized steel
Drawer frontParticleboard, High-pressure melamine laminate, Plastic edging
LegSolid wood, Acrylic paint
Supporting legSteel, Powder coating
Care
Drawer frontWipe clean with a damp cloth.
Wipe dry with a clean cloth.
TV bench/shelf/drawer frame/drawer runner, push-open/leg/supporting legWipe clean with a damp cloth.
Wipe dry with a clean cloth.
Check regularly that all assembly fastenings are properly tightened and retighten when necessary.
- WARNING! Tipping hazard – this product must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.
This product is made up of more than one component. You can find the details of these components below.
