Choose colour:
How to get it
Checking availability...Collect 19 points with
It's OK to change your mind
Mix and match your choice of table top and legs. By buying them separately, you can create a combination with design and size that fits perfectly into your available space.
Material
Table topFibreboard, Printed and embossed acrylic paint, Plastic edging, Honeycomb structure paper filling (min. 70% recycled), Particleboard, Fibreboard
Drawer unit- Basematerial/ Front:
- Particleboard, Acrylic paint, Paper foil, Plastic edging
- Drawer side/ Drawer back:
- Particleboard, Plastic foil
- Drawer bottom:
- Fibreboard, Acrylic paint
Leg- Basematerial:
- Steel, Epoxy/polyester powder coating
- Foot:
- Polypropylene plastic
Care
Table top/drawer unit/legWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Adjustable feet make the table stand steady also on uneven floors.
Drawer stops prevent the drawer from being pulled out too far.
The tabletop has pre-drilled holes to make it easier to attach to the underframe.
This unit can be placed anywhere in the room because it is finished on the back.
Screws for fixing the legs to the table top are included.
Suitable for table tops with a minimum thickness of 25 mm.
This tabletop is suitable to use with legs from our Build Your Own Desk range. It's not suitable to use with underframes from our office range (like MITTZON, TROTTEN or IDÅSEN).
Possible to separate for recycling or energy recovery if available in your community.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Material
Table topFibreboard, Printed and embossed acrylic paint, Plastic edging, Honeycomb structure paper filling (min. 70% recycled), Particleboard, Fibreboard
Drawer unit- Basematerial/ Front:
- Particleboard, Acrylic paint, Paper foil, Plastic edging
- Drawer side/ Drawer back:
- Particleboard, Plastic foil
- Drawer bottom:
- Fibreboard, Acrylic paint
Leg- Basematerial:
- Steel, Epoxy/polyester powder coating
- Foot:
- Polypropylene plastic
Care
Table top/drawer unit/legWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
- This desk has been tested for domestic use and meets the requirements for durability and stability set forth in the following standards: EN 12521 and EN 1730.This table has been developed and tested for home use and is not suitable for installation of a screen stand. Maximum evenly distributed weight is 50 kg. Do not place concentrated weight exceeding 15 kg on a small surface on the table.
This product is made up of more than one component. You can find the details of these components below.
