Which hinges should I use with my METOD kitchen?

UTRUSTA 110° hinges
You use these hinges for a door of a cabinet with shelves and for the METOD bottom corner cabinet with a width of 128 cm. These hinges come with a built-in damper.

UTRUSTA 153° hinges
You use these hinges for a cupboard with inner drawers behind the door and for the 88 cm wide METOD corner base cupboard. The door must be able to open wider than a normal door, so that you can open the inner drawers without any problems. These hinges come with a built-in damper.

Important: the two UTRUSTA hinges for the METOD corner base cabinet with a width of 88 cm that you need to connect the two doors together can be found in the cabinet packaging.

UTRUSTA 95° hinges
You use these hinges for a kitchen cabinet in which a refrigerator, freezer or fridge freezer combination is placed. They ensure that you cannot open the refrigerator door too far to prevent damage to the appliance.

UTRUSTA 45° hinges
You use these hinges with the METOD top corner cabinet, which is mounted at an angle in the corner. These hinges come with a built-in damper.

UTRUSTA hinges for horizontal doors
For a door on a horizontal METOD wall cabinet, use a drawer front instead of a door. The drawer front is fixed with UTRUSTA hinges for horizontal doors. These hinges come in two sizes: small and large. In addition, they are also available with a built-in damper or with pressure / open fittings.

The exact hinge you need depends on the size and weight of the drawer fronts you want to mount. Our kitchen specialists in the store can give you appropriate advice on this.