LISABO / VIHALS Table and 4 chairs, black green/Tibbleby grey-green, 140x78 cm
Choose Table colour:
Choose Chair:
How to get it
Checking availability...Collect 55 points with
You can change your mind
Smart construction and a handcrafted look made our LISABO table series a winner of the Red Dot Design Award in 2016.
- Solid wood
- Wood veneer
Material
Table- Top panel:
- Ash veneer, Fibreboard, Fibreboard, Birch plywood, Fibreboard, Particleboard, Tinted clear acrylic lacquer
- Leg base:
- Solid birch, Tinted clear acrylic lacquer
Chair- Base fabric/ Cover:
- 100% polyester (min. 90% recycled)
- Leg frame/ Cross rail:
- Steel, Epoxy/polyester powder coating
- Seat:
- Polypropylene plastic (min. 50% recycled), Polyurethane foam 35 kg/cu.m.
- Backrest:
- Polypropylene plastic (min. 50% recycled), Polyurethane foam 25 kg/cu.m., 100% recycled unbleached paper
- Protective fabric:
- 100 % polyester
- Back fabric:
- 100 % polyester (100% recycled)
Care
ChairWipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
For maximum quality, re-tighten the screws when necessary.
CoverChairMachine wash, max 40°C, normal process.
Do not bleach.
Do not tumble dry.
Iron, max 150°C.
Professional dry cleaning in tetrachloroethene and hydrocarbons, normal process.
The table surface in ash veneer and legs in solid birch give a warm, natural feeling to your room.
Ash is a strong hardwood material with a beautiful grain pattern. As it ages the colour deepens moderately towards a deep straw colour.
Upholstered chair seat distributes your body weight and reduces pressure on the sitting bone.
With foam padding on both the backrest and seat, you can sit comfortably by the dining table.
Only recommended for indoor use.
Possible to separate for recycling or energy recovery if available in your community.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Material
Table- Top panel:
- Ash veneer, Fibreboard, Fibreboard, Birch plywood, Fibreboard, Particleboard, Tinted clear acrylic lacquer
- Leg base:
- Solid birch, Tinted clear acrylic lacquer
Chair- Base fabric/ Cover:
- 100% polyester (min. 90% recycled)
- Leg frame/ Cross rail:
- Steel, Epoxy/polyester powder coating
- Seat:
- Polypropylene plastic (min. 50% recycled), Polyurethane foam 35 kg/cu.m.
- Backrest:
- Polypropylene plastic (min. 50% recycled), Polyurethane foam 25 kg/cu.m., 100% recycled unbleached paper
- Protective fabric:
- 100 % polyester
- Back fabric:
- 100 % polyester (100% recycled)
Care
ChairWipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
For maximum quality, re-tighten the screws when necessary.
CoverChairMachine wash, max 40°C, normal process.
Do not bleach.
Do not tumble dry.
Iron, max 150°C.
Professional dry cleaning in tetrachloroethene and hydrocarbons, normal process.
- A maximum of 7 chairs can be stacked together.We recommend that the stackable furniture is lifted and moved one at a time.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.This seating furniture has been tested for public use and meets the requirements for safety, durability and stability set forth in the following standards: EN 16139-Level 1.
This product is made up of more than one component. You can find the details of these components below.
