KALLSJÖN Pillar tap, chrome-plated
KALLSJÖN Pillar tap, chrome-plated
KALLSJÖN Pillar tap, chrome-plated
KALLSJÖN Pillar tap, chrome-plated
KALLSJÖN Pillar tap, chrome-plated

KALLSJÖN tap is a perfect addition to complete your outdoor kitchen in a modern design. It’s easy to connect to your garden water supply using the quick connector that comes included with the tap.

Article number304.753.89

Product details

Developed for outdoor use and works perfectly together with GRILLSKÄR outdoor sink unit.Suitable for indoor use as a cold water tap with swivel spout.When outdoor temperatures are below freezing and it is time to turn off the water supply to KALLSJÖN outdoor pillar tap, click off the water hose and leave the tap in open position.Keep in mind that the water is not suitable for drinking if the tap is connected to a garden hose.Quick-connect hose fitting for easy attachment included.
Article number304.753.89
  • Body:Brass, Zinc, Metallized
    Spout:Brass, Metallized
    Never use a steel scourer, scourer pad or similar products as they can scratch the surface.To protect the tap from frost damage, completely drain the tap from all water by disconnecting the water supply, then opening the tap (max. 1 minute) to allow all remaining water to drain.
  • By creating all our taps and showers in a way that helps people use less water and energy, we contribute to enabling a more sustainable life at home.

Technical information

KALLSJÖN

Pillar tap

Type of mixer tapKitchen mixer tap
Max. flow rate at 3 bar5.5 l/min (1.5 gpm)
Max. static pressure10 bar (145.0 psi)
Tested up to a max. static pressure16 bar (232.0 psi)
Min. working pressure0.5 bar (7.25 psi)
Recommended working pressure1-5 bar (14.5-72.5 psi)
Max. hot water temperature80˚C (176˚F)
Recommended cold water temperature10-15˚C (50-59˚F)
Max. worktop thickness50 mm (2'')
Mounting hole measurement34-37 mm (1 3/8-1 7/16”)

Measurements

Length: 18 cm

Height: 15 cm

  • KALLSJÖN
    Pillar tapArticle no304.753.89

    Width: 23 cm

    Height: 6 cm

    Length: 25 cm

    Weight: 0.80 kg

    Package(s): 1

KALLSJÖN Pillar tap, chrome-plated

Saving water at every step

Every time you rinse salad, fill a kettle or wash dishes, you're helping with something essential—saving water. How? Thanks to the small aerator in every IKEA kitchen mixer tap that reduces water flow while maintaining pressure. We didn't invent aerators, but think they are an important example of how we can work together to save water for everyone's benefit.

Four years ago, we started a project to improve our taps and knew we needed more expertise. That's when we hired Antony Smith, an engineer from England who has worked with taps for more than a decade. Now he lives in Sweden and is part of a small team that develops taps and showers for IKEA. Like every new employee, Antony read founder Ingvar Kamprad's Testament of a Furniture Dealer. In it, Ingvar writes 'wasting resources is a mortal sin at IKEA.' This helped Antony understand how much we care about water and how his job is just one step in our larger approach to sustainability.

A company-wide dedication

"When I got to IKEA, I realised we practise what we preach about sustainability," Antony says. "It's a refreshing experience, but it makes our job really difficult because we genuinely have to deliver on sustainability with each product." So why is conserving water so important? Because water is one of our planet's most precious resources. Earth may be covered in a lot of water, but very little of it is drinkable and even less is accessible. No organism can survive without it, and no new water is created. It's constantly recycled, but our freshwater supply is overused; not evenly distributed; and impacted by pollution, contamination and climate change.

A water-conscious commitment

IKEA values the quality and quantity of water so much that we are committed to being water positive by 2020. One aspect is finding simple ways for people to conserve water. Aerators are a step we took long before our water commitment, but Antony and his team are working hard on new water saving taps using sensors or spray technology. Behind the scenes, there's more to our commitment than what we develop for kitchens. Our initiative also includes exploring ways to improve water efficiency across the whole product process, whether it’s at our suppliers, distribution centres or stores. It can mean providing factory workers and their families with fresh drinking water, ensuring all factory water is cleaned before release, reducing water usage in textile production or using rainwater to flush toilets in stores. "We make things hard on ourselves for good reasons, Antony says."

An every-bit-counts belief

See why the aerator in your kitchen mixer tap is a small part of our bigger effort to conserve water? "Some people who live where you can just turn on your tap and get water may not really think about saving water; it's taken for granted," Antony says. But he and his team think about water at every step. It's part of creating a positive impact on people and the planet. We think every water-saving action adds up and thank you for helping with your kitchen mixer tap!

Read moreRead less

Material

What is brass?

Brass is a mixture of copper and zinc and the amounts vary depending on the desired properties. Copper is usually the main material and the more zinc you add results in the brass being harder and stronger, but also results in it being more difficult to shape and less resistant to rust. Brass can be recycled as brass but never into its original metals. At IKEA we use brass for things like knobs, handles, frames and taps.

KALLSJÖN
Pillar tap, chrome-plated

29
Available for delivery
See options at checkout
Checking Click & Collect info
Checking stock
KALLSJÖN Pillar tap, chrome-plated

KALLSJÖN

Pillar tap, chrome-plated
29

KALLSJÖN

29