Is it possible to put strip lighting in a PAX corner solution?
Yes, we always recommend it, but you must take into account the size of the lighting strip according to the size of the cabinet.
For the corner module, we recommend the 42 cm lighting strip.
The 42 cm or 67 cm lighting strips are recommended for the standard cabinet structure.
The 92 cm lighting strips can NOT be used in the corner solution, as one of the two sensors would not be in front of a door.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
PAX offers many extraordinary advantages. Our flagship cabinet can be purchased ready-made or customised to suit your needs. It is an affordable, adaptable and modifiable storage solution that will last for years.
Read moreYou must add the lighting solution to the structure BEFORE attaching it to the wall.
Read moreFor hinged doors or doors without doors, the ceiling height must be at least 1 cm higher. For sliding doors, it must be at least 4 cm higher. More space is needed for exterior lighting, depending on the height.
Read moreNo, it is not possible. If you have handles on both doors, they will clash.
Read moreAs indicated in the instructions, it has to be done by two people for safety reasons and to avoid damage to the products due to their large size.
Read moreYes, a gap must be left.
Read more