TRIXIG Hole repair filler, 150 ml

Use by: Unopened – 3 years from the production date stated on the packaging. Opened – 12 months, provided that the container is closed properly.

Storage temperature: not above 35ºC (+95ºF) and not below 5ºC (+41ºF).

Dispose of the contents at a waste collection point or recycling centre in accordance with local or national regulations. Empty packaging can be disposed of with household waste according to local or national regulations.

Paper tape, sandpaper and a spatula are needed for securing and preparing the surfaces before application and for smoothing them over afterwards.

Apply another layer of filler if needed after 4 hours of drying time.

To make the repaired surface stronger and more durable, paint, varnish or other coatings shall be applied over the filler. On filled outdoor surfaces these coatings should be approved for outdoor use.

Drying time: 4-6 hours. Can be re-applied after 4 hours.

Advice and care instructions