Product details
Cabinet code ENHET B110
Useful information
Secure that the material in your bathroom walls can support the weight of the furniture. If you are uncertain about the installation, contact a professional.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Materials and care
Material
- Tubes:
- Steel, Powder coating
- Shelf:
- Galvanized steel, Powder coating
- Wedge:
- Steel, Epoxy/Acrylic coating
- Frame/ Mounting plate:
- Galvanized steel, Powder coating
- Mirror:
- Glass, Plastic foil
- Plastic fitting:
- Acetal plastic
- Tube:
- Steel, Powder coating
- Insert nut:
- Steel, Epoxy/Acrylic coating
- Water trap frame/ Cleaning plug/ Cover cap/ Outlet pipe/ Outlet connector:
- Polypropylene plastic
- Sealing ring/ Gasket/ Seal:
- Synthetic rubber
- Waste pipe:
- Synthetic rubber, Polypropylene plastic
- Strainer:
- Stainless steel
- Seals:
- Polyethylene foam
- Assembly tool:
- ABS plastic
Ceramics, Coloured glaze
- Body:
- Zinc, Metallized
- Inner body:
- Reinforced polyamide plastic
- Spout:
- Brass, Brass, Metallized
Care
Wipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Wipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Wet marks should always be dried off as soon as possible to stop moisture penetration.
Wipe dry with a clean cloth.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the washbasin.
Clean: With a mild soapy solution. Wipe dry with a clean and dry cloth.
Safety and compliance
Assembly and documents
Assembly instructions
Technical information
GLYPEN
Mixer tap, stainless steel effect
Article number304.423.65| Brand Name | IKEA |
| Type of tap | Kitchen mixer tap |
| Max. flow rate at 3 bar | 5.7 l/min |
| Annual energy consumption | 498 kWh/p.a. |
| Recommended working pressure | 1 - 5 bar (0.1 - 0.5 MPa) (14.5 - 72.5 psi) |
| Min. working pressure | 0.5 bar (0,05MPa) (7.25 psi) |
| Max. static pressure | 10 bar (1,0MPa) (145.0 psi) |
| Max. worktop thickness | 50 mm (2") |
| Mounting hole measurement | 34-37 mm (1 3/8-1 7/16") |
| Connection hoses length | 450 mm (17 3/4") |
| Hose connection size | G 3/8" (R10) |
| Swivel spout | Swivel spout is preset to 360° but can be changed to 90° or 120°. |
| Recommended cold water temperature | 10-15˚C (50-59˚F) |
| Recommended hot water temperature | 60-65°C (140-150°F) |
| Max. hot water temperature | 80˚C (176˚F) |
| Strainer included | No |
| Third party certified according to local standards by | KIWA, PZH, BELGAQUA, SINTEF, ACS |
Measurements
- Width: 64 cm
- Depth: 43 cm
- Height: 87 cm
Packaging
This product comes as 7 packages.
ENHET
Article number404.644.70- Width: 43 cm
- Height: 6 cm
- Length: 61 cm
- Weight: 6.60 kg
- Package(s): 1
ENHET
Article number404.490.74- Width: 26 cm
- Height: 4 cm
- Length: 81 cm
- Weight: 3.07 kg
- Package(s): 1
ENHET
Article number004.599.13- Width: 7 cm
- Height: 4 cm
- Length: 27 cm
- Weight: 0.36 kg
- Package(s): 1
ENHET
Article number004.489.67- Width: 20 cm
- Height: 8 cm
- Length: 76 cm
- Weight: 5.37 kg
- Package(s): 1
RÄNNILEN
Article number205.545.32- Width: 31 cm
- Height: 8 cm
- Length: 45 cm
- Weight: 0.47 kg
- Package(s): 1
TVÄLLEN
Article number504.508.25- Width: 48 cm
- Height: 20 cm
- Length: 68 cm
- Weight: 18.60 kg
- Package(s): 1
GLYPEN
Article number304.423.65- Width: 23 cm
- Height: 6 cm
- Length: 41 cm
- Weight: 1.27 kg
- Package(s): 1




