BEKANT Corner desk right sit/stand, black stained ash veneer black, 63x43 1/4 "
BEKANT Corner desk right sit/stand, black stained ash veneer black, 63x43 1/4 "
BEKANT Corner desk right sit/stand, black stained ash veneer black, 63x43 1/4 "
BEKANT Corner desk right sit/stand, black stained ash veneer black, 63x43 1/4 "
BEKANT Corner desk right sit/stand, black stained ash veneer black, 63x43 1/4 "
BEKANT Corner desk right sit/stand, black stained ash veneer black, 63x43 1/4 "

This sturdy desk is built to outlast years of coffee and hard work. You get a generous work surface and a clever solution to keep cords in place underneath.

Article Number792.823.89

Product details

10-year Limited Warranty. Read about the terms in the Limited Warranty brochure.Changing positions between sitting and standing helps you move your body so you both feel and work better.You can adjust the height of the table top electronically from 25⅝" to 49¼" to ensure an ergonomic working position.It’s easy to keep your desk neat and tidy with the cable management net under the tabletop.Contoured table top; provides support to the wrists and forearms when writing.This desk has been tested for office use and meets the requirements for durability and stability set forth in the following standards: EN 527-2 and ANSI/BIFMA X5.5.Designer

K Malmvall/E Lilja Löwenhielm

Article Number792.823.89
  • Corner table top right
    Particleboard, Ash veneer, Stain, Clear acrylic lacquer, Paper foil, Plastic edging
    Sit/stand underframe/corner table
    Total composition:100 % polyester
    Top rail/ Cross rail/ Leg/ Housing/ Washer:Steel, Epoxy/polyester powder coating
    Foot:Aluminum, Epoxy/polyester powder coating
    Cable management:Stainless steel, 30 % polyester, 70 % rubber
    Wipe clean with a mild soapy solution.Wipe dry with a clean cloth.
  • Corner table top rightWe want to have a positive impact on the planet. That is why by 2030, we want all materials in our products to be recycled or renewable, and sourced in responsible ways.By using particle board with a slice of wood as top layer instead of only solid wood in this product, we use less wood per product. That way, we take better care of resources.By using sawmill leftovers and scrap wood in the particle board in this product, we make use of whole trees and not only the trunks. That way, we take better care of resources.
  • This product comes as 3 packages.
    BEKANTCorner table top rightArticle Number803.662.84
    Width: 45 "Height: ¾ "Length: 65 ¾ "Weight: 32 lb 14 ozPackage(s): 1
    BEKANTSit/stand underframe/corner tableArticle Number602.632.20This product has multiple packages.
    Width: 6 ¼ "Height: 2 ½ "Length: 56 ¼ "Weight: 25 lb 2 ozPackage(s): 1
    Width: 8 ¼ "Height: 5 "Length: 28 ¼ "Weight: 35 lb 13 ozPackage(s): 1

Product size

63 "
43 1/4 "
Min. height: 
22 "
Max. height: 
48 "
Max. load: 
154 lb


Tons of desktop space and great controlsLyndonEasy to assemble and the desktop has tons of room for my monitors, printers, and stationary boxes. The motor controls for moving it up and down are easy and convenient5
Bellamy deskRAYGreat change from the traditional desk this replaced. Lots of flexibility in work positions. Assembly was easy and works great5
Fancy & Good. Lack of the stabilityDONG Y.I love this desk. Motor is working well for stand/sit mode & white color is fancy as other IKEA white color product. One thing insufficient is... in the short side frame, bottom metal frame is not long enough or this side requires more frames to keep the desk stable in x-y.4
Bekant desk is an excellent productKATHRYNThis desk is everything I have come to expect from an IKEA product & more. It’s Solid, sturdy, made from high quality materials, & thoughtfully designed. And of course, easy to assemble. It’s very heavy. We have a 32” monitor plus laptop on it with plenty of room for another monitor & other desk items. The mechanics are excellent...the desk glides up & down smoothly & easily. We looked at many desks before purchasing this & I’m very happy with it.5
Great Sit/ Stand Feature; not as sturdy as I hopedCaliSewistI bought this about a month ago to serve as my sewing table. It was surprisingly easy to put together - my hubby and I did it in an hour or so. I love that I have the ability to sit or stand and sew at the push of a button. This does wonders for my back and neck problems. The hydraulics move the desk up and down at will and you can stop anywhere in between. I love that I can make tiny adjustments in the desk height that help my neck, back and shoulders feel more comfortable. All of the components are working well but the desk is not as sturdy as I hoped it would be. When I adjust the desk up and down, it sometimes gives subtle shakes throughout the surface of the desk top and so I have to move my sewing machine to the middle of the desk before raising or lowering the desk. My machine is only about 30 lbs and I would not call it heavy for a desk this size; however, the benefits outweigh the design flaws. As long as the electronics/hydraulics continue to operate smoothly, I'm a happy camper.4
Disappointing!Alex0601It's been less than 3 months I have started to use the desk and now it got stuck. It does not go down for some reason. I've ended up with a desk which does not work properly.1
Failure @ 20 monthsOnTheFloorI purchased this desk in March of 2018 and use it daily as I work from home. In Nov of 2019 the motor wouldn't lift the desk only lower. I contacted Ikea customer service and they mentioned there was a 10yr warranty. I had to disassemble the motorized legs and bring everything to my local store but without issue they exchanged them for a brand new set. The customer service made all the difference when the product failed. Keep up the good work.5
Does not fully function anymorekmanbearpigI was given this desk as a gift, and it worked wonderfully for a few months, until recently when it stopped working when going up. The motor dies every inch and I have to wait around for a few moments until it goes up another inch. Very Frustrating!1
Easy to assemble and useKIP22I have been very pleased with the ease of putting this desk together as well as it's day to day use as a spacious and well laid out desk. It is easy to raise and lower and it has enough space to allow for multiple uses of the desk (computer, paperwork etc)5
Desk will not raise.TroyRThis desk was great until it stopped working. THE DESK WILL NOT RISE ONLY LOWER. I have realized an unbelievable amount of people have this issue as far as reviews go! I think it is time to solve this problem. Spent 530 on a desk that only works half way. Very displeased.1
Many RegretsPreston00I have now had this desk for 9 months, so I think my opinions are well founded. This is a good desk IN THEORY. Good construction, but some of the placements are awful. FOR EXAMPLE; The support beam for the left side is far too close to where your chair would be. This has now cut open 3 chairs, and it has cut me twice lol. The lift and lower function no longer works (reliably) See I originally loved this desk, but now I wish I went with a different product. IKEA has not responded to any of my support tickets, and I don't really have the money to buy another sit stand desk. So, if you're limited in money, want support response, and want to have your desk last; Go somewhere else. I could have spent my money better by getting the Bekant Normal straight table, and bought some other stuff for my apartment. I'm personally pretty angry and won't be purchasing from IKEA again until they get back to me and fix this.1
Motor stopped working after 4 monthsJarrettAs stated above, the motor to move between the sitting and standing desk stopped working at 4 months. Now the desk is stuck at an awkward position and is borderline unusable. Furthermore I've tried for a couple weeks to get in touch with IKEA through their customer service line so I'm hoping I can get their attention here. I'd stay far away from this product.1

Function solution

Stay active at work!

With BEKANT electric sit/stand underframe you can raise and lower your desk with the simple touch of a button. That helps you change working positions often and keeps your body active. The lowest position for sitting is 22" and the highest for standing is 48".


What is particleboard?

Particleboard is made from recycled wood and sawmill waste – so wood pieces with the wrong shade, woodchips and sawdust become a valuable resource instead of being discarded. We use boards for things like bookcases, bed frames, sofas and kitchen frames. To protect from wear and moisture, we apply varnish, veneer or foil that adds to the furniture's look. The day your sofa or bed needs replacing, the material in the particleboard can be recycled into something entirely new.

Corner desk right sit/stand, black stained ash veneer black63x43 1/4 "

See delivery options at checkout
See options at checkout
Checking stock
BEKANT Corner desk right sit/stand, black stained ash veneer black, 63x43 1/4 "