STJÄRNÖ Bed frame, anthracite/Lyngör dark gray, King
How to get it
Checking availability...Collect 169 points with
It's OK to change your mind
Material
Bed frame- Top frame/ Bottom headboard rail/ Headboard leg/ Footboard/ Bottom footboard rail/ Bedside/ Foot ring:
- Steel, Epoxy/polyester powder coating
- Center support beam:
- Galvanized steel
Mattress base- Bed base frame/ Bed slats:
- Solid pine
- Hook and loop fastener:
- 100 % nylon
- Ribbon:
- 100 % polyester
- Midbeam:
- Laminated veneer lumber
Cover- Ticking:
- 100 % polyester
- Top panel/ Base fabric:
- 100 % polyester (100% recycled)
- Side panel/ Filling:
- 100 %polyester
- Backing:
- 100 % polypropylene
Care
Removable coverCoverMachine wash very hot, normal cycle.
Do not bleach.
Iron low.
Do not dry clean.
Line dry.
Bed frameWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws and other connectors when necessary.
Mattress baseWipe dry with a clean cloth.
For increased stability, re-tighten the screws and other connectors when necessary.
Assembly instructions
STJÄRNÖ Bed frame505.701.92LYNGÖR Mattress base004.882.51LYNGÖR Cover404.882.30

Includes: 1 bed frame, 1 LYNGÖR mattress base, 1 LYNGÖR mattress base cover and 1 SKORVA midbeam.
Mattress and bedlinens are sold separately.
More information about each product in the set can be found on each product page on IKEA.ca
Material
Bed frame- Top frame/ Bottom headboard rail/ Headboard leg/ Footboard/ Bottom footboard rail/ Bedside/ Foot ring:
- Steel, Epoxy/polyester powder coating
- Center support beam:
- Galvanized steel
Mattress base- Bed base frame/ Bed slats:
- Solid pine
- Hook and loop fastener:
- 100 % nylon
- Ribbon:
- 100 % polyester
- Midbeam:
- Laminated veneer lumber
Cover- Ticking:
- 100 % polyester
- Top panel/ Base fabric:
- 100 % polyester (100% recycled)
- Side panel/ Filling:
- 100 %polyester
- Backing:
- 100 % polypropylene
Care
Removable coverCoverMachine wash very hot, normal cycle.
Do not bleach.
Iron low.
Do not dry clean.
Line dry.
Bed frameWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws and other connectors when necessary.
Mattress baseWipe dry with a clean cloth.
For increased stability, re-tighten the screws and other connectors when necessary.
- This bed frame has been tested and meets the requirements for safety, durability and stability set forth by standard EN1725.
Assembly instructions
STJÄRNÖ Bed frame505.701.92LYNGÖR Mattress base004.882.51LYNGÖR Cover404.882.30

- 505.701.92
1 × STJÄRNÖ
Bed framePackage 1- Width: 88 cm (34 ½ ")
- Height: 11 cm (4 ½ ")
- Length: 204 cm (80 ")
- Weight: 25.23 kg (55 lb 10 oz)
Package 2- Width: 30 cm (11 ½ ")
- Height: 7 cm (2 ¾ ")
- Length: 207 cm (81 ½ ")
- Weight: 18.73 kg (41 lb 5 oz)
004.882.511 × LYNGÖR
Mattress basePackage 1- Width: 31 cm (12 ")
- Height: 6 cm (2 ¼ ")
- Length: 204 cm (80 ")
- Weight: 16.00 kg (35 lb 4 oz)
Package 2- Width: 31 cm (12 ")
- Height: 13 cm (5 ")
- Length: 201 cm (79 ")
- Weight: 29.00 kg (63 lb 15 oz)
404.882.301 × LYNGÖR
Cover- Width: 38 cm (14 ¾ ")
- Height: 7 cm (2 ¾ ")
- Length: 57 cm (22 ¼ ")
- Weight: 2.10 kg (4 lb 10 oz)
This product is made up of more than one component. You can find the details of these components below.

















