ENHET Corner kitchen, white/pale grey-green white, 226 cm

Product details

• Good to know

  Be aware that tools and preparation are required to cut the worktop to size and to cut holes for hob, sink and tap to secure a perfect fit.

  Must be secured to the wall for a safe installation. Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.

  Appliances and lighting products are sold separately.

  Cabinet, leg, knob/handle, worktop, sink, water trap, tap, hook and container included.

• Materials and care

  Material

  Handle

  Aluminium, Powder coating

  Worktop

  Particleboard, Laminate, Plastic edging, Unbleached paper

  Base cb f oven w drawer

  Side panel/ Shelf:

  Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Plastic foil, Plastic edging

  Bottom panel/ Back rail:

  Particleboard, Plastic foil, Plastic edging

  Drawer:

  Steel, Epoxy/polyester powder coating

  Drawer bottom:

  Fibreboard, Plastic foil

  Base cb f sink/ corner panel

  Particleboard, Plastic foil, Plastic edging

  Base cb w shelf

  Side panel/ Back rail:

  Particleboard, Plastic foil, Plastic edging

  Bottom panel/ Shelf:

  Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Plastic foil, Plastic edging

  Back panel:

  Fibreboard, Plastic foil

  Base fr w shelves/ wall fr w shelves

  Tubes:

  Steel, Powder coating

  Shelf:

  Galvanized steel, Powder coating

  Wedge:

  Steel, Epoxy/Acrylic coating

  Door/ drawer front for base cb f oven

  Particleboard, Plastic foil, Plastic foil, Plastic edging

  Door

  Basematerial:

  Particleboard

  Front side/ Backside:

  Plastic foil

  Edge:

  Plastic edging

  Hook

  Stainless steel, Powder coating

  Legs f cabinet

  Tube:

  Steel, Powder coating

  Foot:

  Polypropylene plastic (min. 20% recycled)

  Plate:

  Steel, Powder coating, Galvanized steel

  Rivet:

  Steel, Epoxy/Acrylic coating

  Legs f frame

  Tube:

  Steel, Powder coating

  Insert nut:

  Steel, Epoxy/Acrylic coating

  Wall cb w 1 shelf

  Side panel/ Bottom panel/ Top panel/ Shelf:

  Particleboard, Plastic foil, Plastic edging

  Back panel:

  Fibreboard, Plastic foil

  Water trap/strainer 1 bowl

  Tubes/ Cleaning plug:

  Polypropylene plastic

  Strainer/ Strainer basket:

  Stainless steel

  Seals:

  Synthetic rubber, Synthetic rubber

  Inset sink, 1 bowl

  Body:

  Stainless steel

  Foam:

  Polyurethane plastic

  Support panel:

  Polypropylene plastic

  Container

  Polypropylene plastic (min. 20% recycled)

  Mixer tap

  Body:

  Zinc, Metallized

  Inner body:

  Reinforced polyamide plastic

  Spout:

  Brass, Metallized

  Care

  Corner panel/door/drawer front for base cb f oven/wall cb w 1 shelf/inset sink, 1 bowl/base cb f oven w drawer/base cb f sink/base cb w shelf

  Wipe dry with a clean cloth.

  Wipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.

  Handle/hook/legs f cabinet/legs f frame/wall fr w shelves/container/mixer tap/base fr w shelves

  Wipe dry with a clean cloth.

  Worktop

  Wipe dry with a clean cloth.

  To prevent permanent stains on the worktop, wipe clean spills or messes immediately with a soft cloth dampened in water and a mild washing-up detergent or soap.

  Corner kitchen

  Do not use scouring-powder, steel wool, hard or sharp tools which can scratch the surface of the sink.

• Safety and compliance
  Must be secured to the wall for a safe installation. Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.Supporting legs are required when an overhang exceeds 25 cm. The maximum distance between these legs should not be more than 80 cm.
• Assembly and documents

  Assembly instructions

  EKBACKEN Worktop303.376.18EKBACKEN Worktop703.376.21ENHET Base cb f oven w drawer404.405.73ENHET Base cb f sink204.405.74ENHET Base cb w shelf404.405.92ENHET Base cb w shelf604.405.72ENHET Base fr w shelves404.816.10ENHET Base fr w shelves604.816.28ENHET Corner panel504.813.27ENHET Hook804.817.74ENHET Legs f cabinet204.816.30ENHET Legs f frame604.815.48ENHET Wall fr w shelves804.816.13LILLVIKEN Water trap/strainer 1 bowl803.444.47LÅNGUDDEN Inset sink, 1 bowl903.248.73GLYPEN Mixer tap005.669.27

  Advice and care instructions

  EKBACKEN Worktop303.376.18EKBACKEN Worktop703.376.21EKBACKEN Worktop703.376.21EKBACKEN Worktop703.376.21EKBACKEN Worktop703.376.21ENHET Base cb f oven w drawer404.405.73ENHET Base cb f sink204.405.74ENHET Base cb w shelf404.405.92ENHET Base cb w shelf604.405.72ENHET Base fr w shelves404.816.10ENHET Base fr w shelves604.816.28ENHET Legs f cabinet204.816.30ENHET Legs f frame604.815.48ENHET Wall cb w 1 shelf904.405.99ENHET Wall fr w shelves804.816.13LÅNGUDDEN Inset sink, 1 bowl903.248.73GLYPEN Mixer tap005.669.27
• Compliance
  Colour

  Please refer to product description or image

  Components

  Please refer to Packaging tab

  Size

  Please refer to Product size tab

  Weight

  Please refer to Packaging tab

  Material

  Please refer to Materials & care tab

  Manufacturer

  IKEA of Sweden AB

  Country Of Manufacture

  Please refer to each article's Country of Manufacture

  Importer

  IKEA KOREA

  Shipping And Installation Costs

  Please refer to IKEA Services page

  Warranty Information

  Quality assurance is provided according to IKEA quality assurance policy

  Exchange & Return Service

  IKEA Korea/ 1670-4532

  Launch Date Of Same Model

  Please refer to each article's Launch Date

  User Instruction

  Please refer to Product details tab

  Manufacture Date

  Manufactured Date : Refer to product package surface e.g) 1246=12(YY)46(WW)