Product details
A modern wall lamp with a frosted glass shade and matching metal bracket that together create a feeling of quality.
The frosted glass shade spreads a soft light that you can dim to create a calm and comfortable spa feeling in your bathroom.
Perfect to place on its own above the mirror or as a pair with one lamp on each side.
By dimming the lighting, you change the mood in the room.
Tested and approved for bathroom use.
The LED light source consumes up to 85% less energy and lasts 20 times longer than incandescent bulbs.
The lamp emits 600 lumen, which is approximately equal to the light emitted by a 60-watt incandescent bulb.
The light source has a lifetime of approx. 25,000 hours. This corresponds to about 20 years if the lamp is on for 3 hours per day.
Special waste handling may be required. Please contact your local authorities for more information.
Hardwired installation.
- Shade:
- Glass
- Optical lens/ Bracket/ Cover plate:
- Polycarbonate plastic
- Gasket:
- Silicone rubber
- Base:
- Aluminum, Powder coating
- Tape:
- Polyethylene
- Cover:
- Polycarbonate/ABS plastic
- Knob:
- ABS plastic
- Screw/ Washer:
- Steel
- Protection pad:
- EVA plastic
- Plate:
- Aluminum
- Fixing plate:
- Steel, Powder coating
- Wire:
- PVC
Wipe clean using a damp cloth and a mild cleaner.
Wipe clean with a dry cloth.
In some countries electrical installation work may only be carried out by an licensened electrician. Contact your local electricity authority for advice.This product bears the CE mark.Approved for IP44.
Measurements
- Depth: 11.6 cm (5 ")
- Height: 26.5 cm (10 ")
- Luminous flux: 660 lm
- Power: 6.7 W
- Width: 10.5 cm (4 ")
- Estimated life: 25000 hr
LED wall lampArticle Number204.992.58- Width: 12 cm (4 ¾ ")
- Height: 11 cm (4 ¼ ")
- Length: 28 cm (11 ")
- Weight: 1.16 kg (2 lb 9 oz)
- Package(s): 1
Ratings and reviews
Quality control issuesLaurenThe lights look great (a little too white light for my taste, I prefer warmer, but not bad) BUT installation was a massive headache and took tons of time & making our own solutions. The metal plate that sits at the back & fastens to the wall had holes that were off by ~ 1cm. We didn't realize this until after we tried 100 times to mount it, then finally measured to make sure the holes lined up, and they didn't so we ended up having to drill through the metal plate with a drill bit where the hole should have been. We bought two, and the same plate on the other fixture came out of the box severely bent, which we also fixed ourselves. SO, they look great but prepare to struggle... hopefully you have better luck than we did. They're reasonably priced though, so I guess you get what you pay for.3
