Skip to main content

What is included in the IKEA kitchen installation service?

The IKEA kitchen installation service includes full cabinet assembly, worktop fitting, appliance and sink installation, plus lighting and finishing touches for a complete setup.

The service includes the following: 
  • Cabinets & structure
    • Installation, fitting, and securing of all IKEA cabinets. 
    • Fitting and securing of all knobs, handles, doors, drawers, rails, filler pieces, cover panels, corner carousel, legs, plinths, deco strips, and cornices. 
  • Countertops 
    • Cutting and fitting of IKEA pre-cut laminate countertops ( for Glass composite and custom Laminates products is performed by a third-party partner and must be processed under a separate order. )
    • Creating cut-outs on pre-cut laminate countertops for cooktops and sinks. 
  • Appliances, sinks & faucets
    • Installation includes positioning IKEA‑supplied appliances—such as dishwashers, refrigerators, range hoods, and over‑the‑range microwaves—into their designated spaces or in between cabinets. (This service does not include electrical (hardwire or plug‑in), gas, plumbing, HVAC, venting, appliance connections.or built-in appliances)
    • Non‑IKEA supplied appliances may be positioned (dry‑fit only) for a service charge of $200 per appliance. (Maximum allowable weight: 300 lbs per appliance. This dry‑fit service does not include electrical, plumbing, venting, caulking, or final connections.)
    • IKS does not install kitchen sinks or faucets for customers. If an IKEA pre‑cut countertop is purchased, IKS will perform the sink cut‑out during installation. However, all plumbing work, including sink and faucet connections, must be completed by a licensed plumber.
  • Lighting & finishing 
    • Mounting of IKEA cabinet lighting, including cord management (for plug-in models only, no hardwire). 
    • Sealing of all joints and cut-outs. 
  • Clean-up 
    • After installation, the service provider will neatly organize packaging for easy recycling and sweep the job site.
    • Instruction manuals and any spare parts will be saved and left with the customer.
Please note: The removal or disposal of builder’s waste, old cabinets, or existing appliances is not included and remains the customer’s responsibility.
 
Are there also tasks that are not part of the standard service package?
  • Preparation work: 
  • Decorative & custom work 
    • Dry fitting non-IKEA supplied appliances
    • Any custom modifications to IKEA kitchen cabinetry will be discussed during the contractor pre‑visit
  • Service limitations 
    • The service is not available for installations involving fewer than five (5) cabinets or projects with an installation value below $699.
    • The service does not cover the standalone installation of a pre‑cut countertop, sink, or appliance.
Supplementary work is not included in IKEA Kitchen Installation Services and refers to any services, materials, or labour outside the standard scope, such as plumbing, electrical, painting, flooring, demolition, or other general contracting work. Any supplementary work arranged between the customer and the In‑Home Service Provider is a separate, private agreement, and is not the responsibility of IKEA or IKEA Kitchen Services.
 

What particular parts of our articles do you find unsatisfactory or unhelpful?

The text is confusing and hard to understand

The text is not relevant to my question

The text is relevant but not helpful

The text is too long or too short

Thank you for your feedback!

Was the article not helpful? Try one of the related articles below.