I can’t get two steering devices to control the same group of lights at the same time.
To get two steering devices to control the same group of lights, make sure that you have one steering device that is controlling the desired lights and one steering device that is reset to factory settings.
To get two steering devices to control the same group of lights, make sure that you have one steering device that is controlling the desired lights and one steering device that is reset to factory settings (factory reset).
Then hold the two devices no more than 2cm away from each other and press and hold the pairing buttons on both devices at the same time for 10 seconds. The red pairing light on the steering devices will indicate when the pairing is successful and then it will be possible to control the same lights with both devices.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
The first steering device will unpair or become disconnected from the light source.
Read moreYou can control any TRÅDFRI light source
Read moreYou can steer your lights without the remote control if you disconnect the steering device from the gateway after you have used it to pair your light sources.
Read moreTo be able to add a light source to your gateway you need to have a steering device.
Read moreYou always need to have a steering device to be able to control your light bulb.
Read moreYes, you can use the main power switch, steering device or the IKEA Home smart app.
Read more