TONSTAD / KRYLBO Table and 4 chairs, brown stained oak veneer/Axvall blue, 140/196x85 cm (55 1/8/77 1/8x33 1/2 ")
How to get it
Checking availability...Collect 185 points with
It's OK to change your mind
Related products
Material
Extendable table- Top panel:
- Particleboard, Stain, Tinted clear acrylic lacquer, Paper foil, Paper edging, Oak veneer, Tinted lacquer
- Side rail/ Leg:
- Solid wood, Adhesive, Oak veneer, Stain, Tinted clear acrylic lacquer
- Cross rail:
- Particleboard, Plastic foil
Chair- Leg frame:
- Steel, Epoxy/polyester powder coating
- Seat:
- 100 %polyester, Plywood, Polyurethane foam 1.5 lb/cu.ft.
- Backrest frame:
- Steel, Epoxy/polyester powder coating, Polyethylene, Polyurethane foam 1.5 lb/cu.ft., 100% recycled solid cardboard
- Fabric:
- 100% polyester (min. 90% recycled)
Care
Extendable tableWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Non-removable coverChairDo not wash.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.
Vacuum clean.
Advice and care instructions
TONSTAD Extendable table206.007.32

Recommended for indoor use only.
1 self-storing extension leaf included.
A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Material
Extendable table- Top panel:
- Particleboard, Stain, Tinted clear acrylic lacquer, Paper foil, Paper edging, Oak veneer, Tinted lacquer
- Side rail/ Leg:
- Solid wood, Adhesive, Oak veneer, Stain, Tinted clear acrylic lacquer
- Cross rail:
- Particleboard, Plastic foil
Chair- Leg frame:
- Steel, Epoxy/polyester powder coating
- Seat:
- 100 %polyester, Plywood, Polyurethane foam 1.5 lb/cu.ft.
- Backrest frame:
- Steel, Epoxy/polyester powder coating, Polyethylene, Polyurethane foam 1.5 lb/cu.ft., 100% recycled solid cardboard
- Fabric:
- 100% polyester (min. 90% recycled)
Care
Extendable tableWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Non-removable coverChairDo not wash.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.
Vacuum clean.
- The cover has a lightfastness level of 5 (the ability to resist color fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover’s ability to resist abrasion has been tested to handle 50,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.
Advice and care instructions
TONSTAD Extendable table206.007.32


This product is made up of more than one component. You can find the details of these components below.














