




NÄSINGE / BERGMUND Table and 4 chairs, white/Gunnared medium grey white, 130x80 cm (51 1/8x31 1/2 ")
How to get it
- Washable cover
Product details
Four plastic feet to protect the floor against scratches included.
Recommended for indoor use only.
Seats 4.
Possible to separate for recycling or energy recovery if available in your community.
A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
Extra covers for BERGMUND chair are available in many different models, colours and materials, sold separately.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Removable washable cover.
Material
Table- Tabletop:
- Particleboard, Acrylic paint, Melamine foil, Plastic edging, Paint
- Under frame/ Leg:
- Solid wood, Adhesive, Acrylic paint
Chair cover- Back fabric:
- 100 % polyester (100% recycled)
- Total composition:
- 100 %polyester
Chair frame- Leg:
- Solid wood, Acrylic paint
- Seat frame:
- Steel, Epoxy coating
- Backrest frame:
- Steel
- Support panel:
- Polyethylene
- Backrest cushion/ Seat cushion:
- 100 % polyester
- Lining/ Smolder resistant lining:
- Polyester wadding
Care
TableTable and 4 chairsWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Frame, removable coverTable and 4 chairsVacuum clean.
Wipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
Light stains can be removed with a textile cleaner or a damp sponge and a mild soapy solution.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Removable coverChair coverMachine wash warm, normal cycle.
Do not bleach.
Do not tumble dry.
Iron medium temperature, max 300°F/150°C.
Dry clean any solvent except trichloroethylene.
- This chair has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 12520 and EN 1022.The cover has a lightfastness level of 5 (the ability to resist color fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover’s ability to resist abrasion has been tested to handle 50,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.
Assembly instructions
NÄSINGE Table705.875.06BERGMUND Chair cover104.810.51BERGMUND Chair frame004.519.45Advice and care instructions
NÄSINGE Table705.875.06
Measurements
- Table length: 130 cm (51 1/8 ")
- Table width: 80 cm (31 1/2 ")
- Table height: 75 cm (29 1/2 ")
- Chair width: 52 cm (20 1/2 ")
- Chair depth: 59 cm (23 1/4 ")
- Chair height: 95 cm (37 3/8 ")
- This product comes as 9 packages.
NÄSINGE
TableArticle Number705.875.06- Width: 84 cm (33 ¼ ")
- Height: 7 cm (2 ¾ ")
- Length: 134 cm (52 ¾ ")
- Weight: 22.43 kg (49 lb 7 oz)
- Package(s): 1
BERGMUND
Chair coverArticle Number104.810.51- Width: 18 cm (7 ")
- Height: 5 cm (1 ¾ ")
- Length: 22 cm (8 ½ ")
- Weight: 0.40 kg (14 oz)
- Package(s): 4
BERGMUND
Chair frameArticle Number004.519.45- Width: 50 cm (19 ¾ ")
- Height: 19 cm (7 ¼ ")
- Length: 61 cm (24 ")
- Weight: 8.15 kg (17 lb 15 oz)
- Package(s): 4
Error reason: LooksByYouErrorFragment




























