NÄSINGE / BERGMUND Table and 4 chairs, dark brown stained beech veneer/Orrsta light grey black, 120 cm (47 1/4 ")
Choose Table colour:
Choose Chair:
How to get it
Checking availability...Collect 161 points with
It's OK to change your mind
- Solid wood
- Wood veneer
Material
Table- Tabletop:
- Particleboard, Clear acrylic lacquer, Paper foil, Beech veneer, Stain, Clear lacquer
- Under frame/ Leg:
- Solid wood, Adhesive, Stain, Clear acrylic lacquer
Chair cover- Cover/ Fabric:
- 65% polyester (min. 90% recycled), 35 % cotton
- Lining/ Back fabric:
- 100 % polyester (100% recycled)
Chair frame- Leg:
- Solid wood, Stain, Clear acrylic lacquer
- Seat frame:
- Steel, Epoxy coating
- Backrest frame:
- Steel
- Support panel:
- Polyethylene
- Backrest cushion/ Seat cushion:
- 100 % polyester
- Lining/ Smolder resistant lining:
- Polyester wadding
Care
TableTable and 4 chairsWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Frame, removable coverTable and 4 chairsVacuum clean.
Wipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Light stains can be removed with a textile cleaner or a damp sponge and a mild soapy solution.
For maximum quality, re-tighten the screws when necessary.
Removable coverChair coverMachine wash warm, normal cycle.
Do not bleach.
Do not tumble dry.
Iron medium temperature, max 300°F/150°C.
Dry clean any solvent except trichloroethylene.
Assembly instructions
NÄSINGE Table905.875.29BERGMUND Chair cover704.862.01BERGMUND Chair frame103.867.37Advice and care instructions
NÄSINGE Table905.875.29
Four plastic feet to protect the floor against scratches included.
Recommended for indoor use only.
Seats 4.
Possible to separate for recycling or energy recovery if available in your community.
The tabletop is split in half, making transportation easier with a more compact package.
A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Extra covers for BERGMUND chair are available in many different models, colours and materials, sold separately.
Removable washable cover.
Material
Table- Tabletop:
- Particleboard, Clear acrylic lacquer, Paper foil, Beech veneer, Stain, Clear lacquer
- Under frame/ Leg:
- Solid wood, Adhesive, Stain, Clear acrylic lacquer
Chair cover- Cover/ Fabric:
- 65% polyester (min. 90% recycled), 35 % cotton
- Lining/ Back fabric:
- 100 % polyester (100% recycled)
Chair frame- Leg:
- Solid wood, Stain, Clear acrylic lacquer
- Seat frame:
- Steel, Epoxy coating
- Backrest frame:
- Steel
- Support panel:
- Polyethylene
- Backrest cushion/ Seat cushion:
- 100 % polyester
- Lining/ Smolder resistant lining:
- Polyester wadding
Care
TableTable and 4 chairsWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Frame, removable coverTable and 4 chairsVacuum clean.
Wipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Light stains can be removed with a textile cleaner or a damp sponge and a mild soapy solution.
For maximum quality, re-tighten the screws when necessary.
Removable coverChair coverMachine wash warm, normal cycle.
Do not bleach.
Do not tumble dry.
Iron medium temperature, max 300°F/150°C.
Dry clean any solvent except trichloroethylene.
- The cover has a lightfastness level of 5 (the ability to resist color fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover's ability to resist abrasion has been tested to handle 20,000 cycles. A cover that withstands 15,000 cycles or more is suitable for furniture that should withstand everyday use in the home.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.
Assembly instructions
NÄSINGE Table905.875.29BERGMUND Chair cover704.862.01BERGMUND Chair frame103.867.37Advice and care instructions
NÄSINGE Table905.875.29
- 905.875.29
1 × NÄSINGE
TablePackage 1- Width: 35 cm (13 ¾ ")
- Height: 5 cm (2 ")
- Length: 92 cm (36 ¼ ")
- Weight: 8.00 kg (17 lb 10 oz)
Package 2- Width: 68 cm (26 ¾ ")
- Height: 5 cm (1 ¾ ")
- Length: 124 cm (48 ¾ ")
- Weight: 17.55 kg (38 lb 11 oz)
704.862.014 × BERGMUND
Chair cover- Width: 18 cm (7 ")
- Height: 4 cm (1 ¾ ")
- Length: 24 cm (9 ½ ")
- Weight: 0.43 kg (15 oz)
103.867.374 × BERGMUND
Chair frame- Width: 50 cm (19 ¾ ")
- Height: 19 cm (7 ¼ ")
- Length: 61 cm (24 ")
- Weight: 8.15 kg (17 lb 15 oz)
This product is made up of more than one component. You can find the details of these components below.
Customer reviews
Easy to put together ,solid furniture ,very reasonably priced and look stylish and great quality
