LISABO / VIHALS Table and 4 chairs, black/green Tibbleby gray-green, 105 cm (41 3/8 ")
Choose Table colour:
Choose Chair:
How to get it
Checking availability...Collect 103 points with
It's OK to change your mind
Smart construction and a handcrafted look made our LISABO table series a winner of the Red Dot Design Award in 2016.
- Solid wood
- Wood veneer
Material
Table- Top panel:
- Ash veneer, Fiberboard, Birch veneer, Fiberboard, Fiberboard, Birch plywood, Tinted clear acrylic lacquer, Tinted clear acrylic lacquer
- Leg base:
- Solid birch, Tinted clear acrylic lacquer
Chair- Base fabric/ Cover:
- 100% polyester (min. 90% recycled)
- Leg frame/ Cross rail:
- Steel, Epoxy/polyester powder coating
- Seat:
- Polypropylene plastic (min. 50% recycled), Polyurethane foam 2.2 lb/cu.ft.
- Backrest:
- Polypropylene plastic (min. 50% recycled), Polyurethane foam 1.5 lb/cu.ft., 100% recycled unbleached paper
- Protective fabric:
- 100 %polyester
- Back fabric:
- 100 % polyester (100% recycled)
Care
ChairWipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
For maximum quality, re-tighten the screws when necessary.
CoverChairMachine wash warm, normal cycle.
Do not bleach.
Do not tumble dry.
Iron medium temperature, max 300°F/150°C.
Dry clean any solvent except trichloroethylene.
TableWipe dry with a clean cloth.
Advice and care instructions
LISABO Table504.165.01
The table surface in ash veneer and legs in solid birch give a warm, natural feeling to your room.
This table has been tested against our strictest standards for stability, durability and safety to withstand everyday use in your home for years.
Ash is a strong hardwood material with a beautiful grain pattern. As it ages the color deepens moderately towards a deep straw color.
Upholstered chair seat distributes your body weight and reduces pressure on the sitting bone.
Recommended for indoor use only.
Possible to separate for recycling or energy recovery if available in your community.
Material
Table- Top panel:
- Ash veneer, Fiberboard, Birch veneer, Fiberboard, Fiberboard, Birch plywood, Tinted clear acrylic lacquer, Tinted clear acrylic lacquer
- Leg base:
- Solid birch, Tinted clear acrylic lacquer
Chair- Base fabric/ Cover:
- 100% polyester (min. 90% recycled)
- Leg frame/ Cross rail:
- Steel, Epoxy/polyester powder coating
- Seat:
- Polypropylene plastic (min. 50% recycled), Polyurethane foam 2.2 lb/cu.ft.
- Backrest:
- Polypropylene plastic (min. 50% recycled), Polyurethane foam 1.5 lb/cu.ft., 100% recycled unbleached paper
- Protective fabric:
- 100 %polyester
- Back fabric:
- 100 % polyester (100% recycled)
Care
ChairWipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
For maximum quality, re-tighten the screws when necessary.
CoverChairMachine wash warm, normal cycle.
Do not bleach.
Do not tumble dry.
Iron medium temperature, max 300°F/150°C.
Dry clean any solvent except trichloroethylene.
TableWipe dry with a clean cloth.
- A maximum of 7 chairs can be stacked together.We recommend that the stackable furniture is lifted and moved one at a time.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.This seating furniture has been tested for public use and meets the requirements for safety, durability and stability set forth in the following standards: EN 16139-Level 1.
Advice and care instructions
LISABO Table504.165.01
This product is made up of more than one component. You can find the details of these components below.
