Good to know

Materials and care

Material

Table

Leg base:: Solid birch, Tinted clear acrylic lacquer

Top panel:: Ash veneer, Fiberboard, Birch veneer, Solid birch, Tinted clear acrylic lacquer, Fiberboard, Birch plywood

Chair

Fabric/ Cover:: 100% polyester (min. 90% recycled)

Leg frame/ Cross rail:: Steel, Epoxy/polyester powder coating

Seat:: Polypropylene plastic (min. 50% recycled), Polyurethane foam 2.2 lb/cu.ft.

Backrest:: Polypropylene plastic (min. 50% recycled), Polyurethane foam 1.5 lb/cu.ft., 100% recycled unbleached paper

Protective fabric:: 100 %polyester

Back fabric:: 100 % polyester (100% recycled)

Care

Wipe clean with a mild soapy solution.

Wipe dry with a clean cloth.

For maximum quality, re-tighten the screws when necessary.

Machine wash warm, normal cycle.

Do not bleach.

Do not tumble dry.

Iron medium temperature, max 300°F/150°C.

Dry clean any solvent except trichloroethylene.

Wipe dry with a clean cloth.

Safety and compliance

A maximum of 7 chairs can be stacked together.We recommend that the stackable furniture is lifted and moved one at a time.This table has been tested for general, non-domestic use and meets the requirements for safety, durability and stability set forth in the following standard: EN 15372.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.This seating furniture has been tested for public use and meets the requirements for safety, durability and stability set forth in the following standards: EN 16139-Level 1.

Assembly and documents