Skip to main content
EN CAEnglish
phoneOrder by phone
6 GENOMDRIVA images
Skip images
GENOMDRIVA Under cabinet range hood, Stainless steel
Best Seller
GENOMDRIVA Under cabinet range hood, Stainless steel
GENOMDRIVA Under cabinet range hood, Stainless steel
GENOMDRIVA Under cabinet range hood, Stainless steel
GENOMDRIVA Under cabinet range hood, Stainless steel
GENOMDRIVA Under cabinet range hood, Stainless steel

GENOMDRIVA Under cabinet range hood, Stainless steel

Price $ 149.00

How to get it

Available services
Key features

  • 5 year limited warranty

A kitchen hood with LED lighting and all the basic functions you need. Coordinates with other stainless steel appliances and creates a uniform look in your kitchen since you mount it inside a wall cabinet.

Article Number304.621.36

Product details

5 year warranty. Read about the terms in the warranty brochure.

The included LED bulb provides energy saving.

Control panel placed at front for easy access and use.

Designer

IKEA of Sweden

Article Number304.621.36

Good to know

5 sones.

90 CFM.

Motor power: 49W.

Voltage: 120V.

Built-in range hood with 2 different speeds.

To be installed in a 30" wide wall cabinet.

You will find complete information about the installation and use of this product under the tab Assembly instructions & documents.

One grease filter included.

Materials and care

Care

Clean surfaces with a soft cloth dampened with water and a mild washing-up detergent/soap or a cleaning detergent specifically designed for the appliance.

Never use corrosive or abrasive detergents, abrasive sponges, scourers or metallic scrapers.

Safety and compliance

This extractor hood is not recommended for use with 30" gas cooktops.

Assembly and documents

Assembly instructions

GENOMDRIVA Under cabinet range hood304.621.36

Advice and care instructions

GENOMDRIVA Under cabinet range hood304.621.36

Measurements

  • Width: 76.2 cm (30 ")
  • Depth: 47.3 cm (18 5/8 ")
  • Height: 16.4 cm (6 1/2 ")
  • Weight: 5.00 kg (11 lb)

Packaging

GENOMDRIVA

Article Number304.621.36
  • Width: 54 cm (21 ")
  • Height: 17 cm (6 ¾ ")
  • Length: 80 cm (31 ¾ ")
  • Weight: 5.70 kg (12 lb 9 oz)
  • Package(s): 1

Ratings and reviews

Wrong instructionsSomaThe 1/2" strain relief does not fit the precut hole (on the hood, not the cabinet). The instruction also calls for 6" duct but the round damper is actually 7", so you need a reducer that takes a lot of space. IKEA, focus on creating value rather than cutting cost...2
It's fine, but not greatKarlThe lack of screens to hide the inside is too bad. If you buy Ikea cabinets, you're left needing an Ikea range hood to fit the depth. But there's only this or a $1000 option that is huge. Would be nice if there was a $300 version that fit and hid the inside for a cleaner look. This works, but it looks pretty cheap.3
Quality Control (lack of)BruceSeveral rivers on the top were poorly installed and prevented it from resting flat against upper cabinet. Rather than returning, I removed them and installed new rivets correctly. I suspect other units might have the same problem. 4
A couple of things I wish they would change. ElizabethI appreciate that the light and fan switch are on the top panel to give a cleaner look but for a short girl like me, I can barely reach it. It would also be helpful if the switches were labelled so that they could be seen from eye level. It is also quite square. The front comes straight out on the sides and blocks our cabinet door slightly from opening. We have added a small runner stop on the corner of the vent hood to avoid leaving a dent in the cupboard. We were fortunate enough to pick it up for $99 in the as is section. I don’t know that I would have paid full price for it. 4
Works excellentJoeHighly recommend this product5
It is good Anonymous reviewerV good5
Quality product AlexExhaust fan outlet vent is 8in, old vent exhaust usually 6in5
Loud and does not removeAnonymous reviewerLoud and does not remove a lot of steam.2
Super cheap, not well designedEvanSuper cheap, not well designed Has rough metal edges on sides has a 7" vent exhaust with only a 160 cfm motor, can barely more any air even on max fan setting would NOT recommend1
Great value for moneyVictoriaWe replaced our 20-year-old under cabinet range hood with this one, and we’re beyond happy! It works great, has strong fan, looks amazing, and perfectly matches our new kitchen appliances. Highly recommend!5
Bad fanByronVery cheap, wiring only on the right side of the fan, came scratched, looks cheap. Overall pretty bad looking once out of the box, but it works fine.1
Range hoodMichelineI don’t like the look. Fan doesn’t seem that strong. You can see inside filter when you stand back into the eating area.1
Great quality great priceLoriGreat quality great price1

Customer reviews

3.4Average rating
19Reviews

Function solution

Sound levels

Sound levels for appliances are measured in decibels (dBs). Our extractor hoods have been tested in speed 3 to determine the dB level. The sound level of your extractor hood is affected by: • Type of installation. Exhaust-mode or recirculation-mode. • Length and diameter of the exhaust pipe between extractor and exhaust vent. The longer it is and the smaller the diameter, the louder it gets. • 90° bends. The more bends you have in the exhaust pipe, the greater the sound.

Get the look

Ideas based on your recently viewed products

Skip listing