How to get it
Checking availability...Collect 99 points with
It's OK to change your mind
EKENÄSET armchair adds a stylish retro vibe to the room that’s inspired by 1950s Scandinavian design. The classic look goes anywhere in the home – and gives you sturdy and robust seating for many years.
Material
- Total composition:
- 100 % polyester
- Clip:
- Polypropylene
- Leather/ Contact area:
- Dyed through top-grain leather with a treated, embossed and pigmented surface
- Coated fabric parts:
- 100 % polyurethane, 75 % polyester, 25 % cotton
- Back and seat frame:
- Solid wood
- Armrest frame/ Front rail:
- Solid beech, Tinted lacquer
- Back cushion:
- High-resilience polyurethane foam (cold foam) 2.2 lb/cu.ft., Polyurethane foam 2.0 lb/cu.ft.
- Seat cushion:
- Polyurethane foam 2.0 lb/cu.ft.
- Non-contact area:
- 100 % Polyurethane, 75 %polyester, 25 % cotton
Care
Frame, non-removable coverClean with a dust cloth or vacuum lightly using the soft brush attachment.
Wipe clean with a damp cloth.
Protect from direct sunlight to prevent drying out.
Pay attention to avoid contact between the surface and sharp objects, especially around the product’s corners. Ensure the surface is well protected during movement to avoid damage.
These care instructions apply only to the surface of the leather and coated fabric.
Marks and variations in the grain and colour are due to the leather’s inherent properties. They are natural in genuine leather and do not require maintenance or repair.
Assembly instructions
EKENÄSET Armchair206.243.37
Clean lines and supportive comfort, regardless if you’re reading, socializing with friends or just relaxing for a moment.
The seat cushion and backrest are covered with GRANN – a soft, smooth and strong grain leather with natural variations. Other surfaces have the coated fabric BOMSTAD.
Each armchair has a unique expression since the wooden frame is first stained in a brown tone and then covered with clear lacquer that makes the wood’s natural grains visible.
GRANN cover is made of supple grain leather which is a very high-quality leather. As it ages it becomes softer and develops a darker tone and fine patina.
Appropriate chemicals, detergents, softeners or treatments should be applied. Any corrosive materials like acids, solvents, alkalis, alcohols as well as human or animal body fluids may damage leather.
The products are covered with grain leather and coated fabric. Grain leather and coated fabric require different care.
Material
- Total composition:
- 100 % polyester
- Clip:
- Polypropylene
- Leather/ Contact area:
- Dyed through top-grain leather with a treated, embossed and pigmented surface
- Coated fabric parts:
- 100 % polyurethane, 75 % polyester, 25 % cotton
- Back and seat frame:
- Solid wood
- Armrest frame/ Front rail:
- Solid beech, Tinted lacquer
- Back cushion:
- High-resilience polyurethane foam (cold foam) 2.2 lb/cu.ft., Polyurethane foam 2.0 lb/cu.ft.
- Seat cushion:
- Polyurethane foam 2.0 lb/cu.ft.
- Non-contact area:
- 100 % Polyurethane, 75 %polyester, 25 % cotton
Care
Frame, non-removable coverClean with a dust cloth or vacuum lightly using the soft brush attachment.
Wipe clean with a damp cloth.
Protect from direct sunlight to prevent drying out.
Pay attention to avoid contact between the surface and sharp objects, especially around the product’s corners. Ensure the surface is well protected during movement to avoid damage.
These care instructions apply only to the surface of the leather and coated fabric.
Marks and variations in the grain and colour are due to the leather’s inherent properties. They are natural in genuine leather and do not require maintenance or repair.
- This seating furniture is for domestic/home use and is tested according to EN 12520.
Assembly instructions
EKENÄSET Armchair206.243.37
- 206.243.37
1 × EKENÄSET
Armchair- Width: 66 cm (25 ¾ ")
- Height: 36 cm (14 ¼ ")
- Length: 76 cm (29 ¾ ")
- Weight: 14.80 kg (32 lb 10 oz)
