Skip to main content

BROGRUND Sink faucet with sensor, chrome plated

Price $ 199.00
Now or Never

How to get it

Available services
Key features
  • 10 year limited warranty

Like magic, the water turns on at the slightest hand movement in front of the tap, at a pre-set temperature. A clean and simple design that’s hygienic too, since you don’t need to touch the tap.

Article Number804.233.50

Product details

10-year Limited Warranty. Read about the terms in the Limited Warranty brochure.

Built-in pressure compensating aerator keeps the water flow just right and enables water-efficiency.

Designer

H Preutz/N Karlsson

Article Number804.233.50

Good to know

A tool is included that makes it easy to install the faucet in place.

Water and energy saving aerator (4.5 l/min, 1.2 gpm) for high-pressure systems included.

Connection hoses with 9/16" x 24UNEF connection included. Connection length: 60 cm.

4 batteries (LR6 AA 1.5V) included.

Max. temperature hot water system 176°F.

Spare parts are available to prolong the life of your product. For more information, contact IKEA Customer Services at your IKEA store or IKEA.com.

Replacement batteries are available in most stores where alkaline batteries are sold.

If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.

Fits IKEA sinks and standard sinks from other manufacturers.

Flow rate: 1.2 gal./min. (4.5 l/min.)

The water turns on automatically when the sensor detects your hands or an object in front of it, and turns off automatically 2 seconds after removing them.

The water temperature is controlled using the lever on the side of the faucet.

Materials and care

Material

Body:
Zinc, Chrome plated
Inner body:
Brass

Care

Wipe clean with a water dampened soft cloth and a mild non-abrasive dish detergent or soap, if necessary.

Never use scouring powder, steel wool or a detergent that is calcium-dissolving, sour or contains alcohol or an abrasive.

Safety and compliance

Tested and certified according to applicable codes and standards including: ASME A112.18.1/CSA B125.1, NSF 61, NSF 372 and EPA WaterSense.This tap is for use on high pressure water systems. Tested to work with a max. pressure of 10 bar (1000 kPa). Recommended working pressure range is 1.0 – 5.0 bar (100 kPa – 500 kPa).

TECHNICAL INFORMATION

BROGRUND

Sink faucet with sensor, chrome plated

Article Number804.233.50
Type of faucetSink faucet with sensor
Max. flow rate at 3 bar4.5 l/min (1.2 gpm)
Recommended working pressure1 - 5 bar (0.1 - 0.5 MPa) (14.5 - 72.5 psi)
Min. working pressure1 bar (0,1MPa) (14.5 psi)
Max. static pressure10 bar (1,0MPa) (145.0 psi)
Max. countertop thickness50 mm (2")
Mounting hole measurement34-37 mm (1 3/8-1 7/16")
Connection hoses length450 mm (17 3/4")
Hose connection size9/16" x 24UNEF
Recommended cold water temperature10-15˚C (50-59˚F)
Recommended hot water temperature60-65°C (140-150°F)
Max. hot water temperature80˚C (176˚F)
Strainer includedNo
Amount of batteries4 pcs
Battery typeAA
Third party certified according to local standards by

Measurements

  • Height: 13 cm (5 1/8 ")

Packaging

BROGRUND

Article Number804.233.50
  • Width: 21 cm (8 ")
  • Height: 7 cm (2 ¾ ")
  • Length: 35 cm (13 ½ ")
  • Weight: 1.65 kg (3 lb 10 oz)
  • Package(s): 1

Ratings and reviews

works just fine...Melvynlove it...5
Great for the kidsJuanI use it on the main floor washroom and is perfect for the kids to use. The only flaw is the gasket that comes in contact with the sink does not seal the gap properly causing it to leak to the bottom.4

Customer reviews

3.9Average rating
64Reviews

Related products

We recommend

SustainabilityPeople and planet

Energy and resources

Hygienic and convenient – Magic at the slightest movement of the hand

Morning rush hour can get a bit messy with all the activities around the sink, which is sometimes shared by several people. BROGRUND sink faucet with sensor makes things easier and more hygienic since the water turns on with a slight hand movement and then turns off automatically – without touching the faucet. No more puddles of water on or around the faucet from wet hands – and the temperature is conveniently pre-set using the small lever on the side.

BROGRUND Sink faucet with sensor, chrome plated

Water-conscious commitment in bathrooms

Every time you brush your teeth, wash your hands, shave or take a bath, you can help with something essential – saving water. That’s why all our taps have an aerator that saves water and energy while keeping the water stream just right. But that’s just a small part of a bigger effort: conserving more clean water than we use.

Antony Smith, an engineer from England, remembers when he joined IKEA and the small team that develops our taps and showers. "I realized we practice what we preach about sustainability," Antony says. "It's a refreshing experience, but it makes our job really difficult because we genuinely have to deliver on sustainability with each product."

Water is precious, but often taken for granted

So, why conserving water? Because no organism on earth can survive without it, and no new water is created. It's constantly recycled, but our freshwater supply is overused and not evenly distributed. It’s impacted by pollution, contamination and climate change, too. "Those of us who live where you can just turn on your tap may not think about saving water; it's taken for granted," Antony says.

Thinking about water at every step

Behind the scenes, we constantly explore new ways to improve water efficiency. That includes providing factory workers and their families with fresh drinking water, ensuring all factory water is cleaned before release, reducing water usage in textile production and using rainwater to flush toilets in stores. And now we are working on new taps using sensors and spray technology – and new water-efficient showers – to save even more. Every water-saving action adds up.

Learn more

Material

What are zinc and zamak?

Zinc is a metallic element while zamak is a mixture of zinc, aluminium, magnesium and copper. Both are durable materials and easy to cast into different shapes. They are good at conducting heat and electricity. Objects made of zinc or zamak are often given a surface treatment to resemble metals like gold, brass or stainless steel. Both zinc and zamak retain their good properties when they are recycled to become new objects.

Get the look

Ideas based on your recently viewed products

More from the BROGRUND series

Accessories for BROGRUND