ÅLHULT / NORDMANSSKÄR Table and 2 chairs, beige/brown/Bomstad black black, 80x74 cm (31 1/2x29 1/8 ")
Choose Chair:
How to get it
Checking availability...Collect 49 points with
It's OK to change your mind
4-seat dining set featuring an ash veneer table with easy-care tinted lacquer and comfy foam-padded upholstered chairs – a stylish, space-smart setup that brings natural warmth and elegance to your home.
- Wood veneer
Material
Table- Tabletop:
- Particleboard, Ash veneer, Stain, Tinted clear acrylic lacquer, Paper foil, Ash veneer, Stain, Tinted lacquer
- Under frame:
- Solid wood, Adhesive, Ash veneer, Stain, Tinted clear acrylic lacquer
- Leg:
- Particleboard, Ash veneer, Stain, Tinted clear acrylic lacquer
Seat shell- Coated fabric parts:
- 100 % polyurethane, 75 % polyester, 25 % cotton
- Seat shell:
- Layer-glued wood veneer
- Seat foam:
- Polyurethane foam 1.5 lb/cu.ft.
- Back foam:
- Polyurethane foam 1.2 lb/cu.ft.
- Inner fabric:
- Non-woven polypropylene
Chair frame, legsSteel, Epoxy/polyester powder coating
Care
SeatSeat shellDo not wash.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.
Vacuum clean.
Chair frame, legsWipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
TableWipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
ÅLHULT table features an ash veneer surface with a tinted clear lacquer that protects the wood’s natural beauty and simplifies upkeep.
The distinctive grain pattern in the ash veneer gives each table a unique character.
With foam padding on both the backrest and seat, you can sit comfortably by the dining table.
Upholstered backrest provides good support for your back.
Recommended for indoor use only.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Material
Table- Tabletop:
- Particleboard, Ash veneer, Stain, Tinted clear acrylic lacquer, Paper foil, Ash veneer, Stain, Tinted lacquer
- Under frame:
- Solid wood, Adhesive, Ash veneer, Stain, Tinted clear acrylic lacquer
- Leg:
- Particleboard, Ash veneer, Stain, Tinted clear acrylic lacquer
Seat shell- Coated fabric parts:
- 100 % polyurethane, 75 % polyester, 25 % cotton
- Seat shell:
- Layer-glued wood veneer
- Seat foam:
- Polyurethane foam 1.5 lb/cu.ft.
- Back foam:
- Polyurethane foam 1.2 lb/cu.ft.
- Inner fabric:
- Non-woven polypropylene
Chair frame, legsSteel, Epoxy/polyester powder coating
Care
SeatSeat shellDo not wash.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.
Vacuum clean.
Chair frame, legsWipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
TableWipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
- This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.
This product is made up of more than one component. You can find the details of these components below.
