Skip to main content
EN AUEnglish
6 BROGRUND images
Skip images
BROGRUND Wash-basin mixer tap with sensor, chrome-plated
Best seller
BROGRUND Wash-basin mixer tap with sensor, chrome-plated
BROGRUND Wash-basin mixer tap with sensor, chrome-plated
BROGRUND Wash-basin mixer tap with sensor, chrome-plated
BROGRUND Wash-basin mixer tap with sensor, chrome-plated
BROGRUND Wash-basin mixer tap with sensor, chrome-plated

BROGRUND Wash-basin mixer tap with sensor, chrome-plated

Price $ 199
Last chance to buy
(64)

How to get it

  • 10 year guarantee

BROGRUND

Like magic, the water turns on at the slightest hand movement in front of the tap, at a pre-set temperature. A clean and simple design that’s hygienic too, since you don’t need to touch the tap.

Article Number404.233.52

Product details

10 year guarantee. Read about the terms in the guarantee brochure.

Built-in pressure compensating aerator keeps the water flow just right and enables water-efficiency.

Designer

H Preutz/N Karlsson

  • A tool is included that makes it easy to install the mixer tap in place.

    Water and energy saving aerator for high-pressure systems included.

    Connection hoses with 1/2" connection included. Length: 60 cm.

    4 batteries (LR6 AA 1.5V) included.

    WELS 6 Star Rating, 4.5 l/min.

    Max. temperature hot water system 80°C/176°F.

    Spare parts are available to prolong the life of your product. For more information, contact IKEA Customer Services at your IKEA store or IKEA.com.

    Replacement batteries are available in most stores where alkaline batteries are sold.

    If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.

    Fits IKEA wash-basins and standard wash-basins from other manufacturers.

    The water turns on automatically when the sensor detects your hands or an object in front of it, and turns off automatically 2 seconds after removing them.

    The water temperature is controlled using the lever on the side of the mixer tap.

  • Material

    Body:
    Zinc, Chrome-plated
    Inner body:
    Brass

    Care

    Wipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.

    Never use scouring powder, steel wool or a detergent that is calcium-dissolving, sour or contains alcohol or an abrasive.

  • Tested and certified to relevant Australian mechanical, quality, safety and hygienic standards, including WELS.This tap is for use on high pressure water systems. Tested to work with a max. pressure of 10 bar (1000 kPa). Recommended working pressure range is 1.0 – 5.0 bar (100 kPa – 500 kPa).

  • Advice and care instructions

    BROGRUND Wash-basin mixer tap with sensor404.233.52BROGRUND Wash-basin mixer tap with sensor404.233.52BROGRUND Wash-basin mixer tap with sensor404.233.52BROGRUND Wash-basin mixer tap with sensor404.233.52BROGRUND Wash-basin mixer tap with sensor404.233.52

Measurements

  • Height: 13 cm

  • BROGRUND

    Article Number404.233.52
    • Width: 21 cm
    • Height: 7 cm
    • Length: 35 cm
    • Weight: 1.65 kg
    • Package(s): 1

Reviews

..EvilinGet product, as I purchased for my elderly parent whom forgot s to turn off taps , now I got have to worry 4
Works WellNeilIt’s expensive however it works really well. Simple to install as battery operated.5
Stylish and easyMarleneI like the sensor , very convenient and water saving5
Great productLynneThis works perfectly. Easy to install and use.5
Another great IKEA productAmroAnother great IKEA product5
Simply excellent valueRichardWhat can I say, other than simply brilliant. Just over ten years ago we built a new house, and installed a sensor tap in one bathroom. We would have put them in all the bathrooms, but the one tap cost over $1k at the time so I couldn't justify it. It's been really good, although some people still find it hard to understand how it works and try to fiddle with the hot/cold lever to get it to work not realising they just need to put their hand under the tap..... Interestingly, this new tap has the option of removing the adjusting lever on the side if you want. Another minor annoyance with our old sensor tap is the battery is actually housed inside the tap head itself - raising some concerns that it might get affected by water, plus it's also a special battery that used to be used by a handful of analogue film cameras and is now a little tricky to purchase - it's still available, but I can see it getting harder and harder to get in the future. This new sensor tap uses four standard AA batteries in a separate box, so it avoids all of that. The the two minor issues we have with our old tap are both fixed with this one! Anyhow, one of the ceramic valves in one of our other bathroom taps needed replacing so I thought that rather than spend money on some new valves I'd put the money towards these sensor taps given that they were so cheap. On opening the box I was super impressed with the quality - everything seemed very well made. It also came with complete instructions and tools to both install the tap as well as to remove the filter. The battery box even had batteries already installed! The hardest part of the installation was removing the old tap - once that was done, putting in the new tap was very simple. The only tool you really need is a couple of adjustable wrenches to tighten the hoses onto the water supply. Only negative? Well, it is a water saving tap so the water pressure coming out is low, but can live with that.5

Customer reviews

3.9Average rating
64Reviews
Planner

More bath, less room?

Bathrooms often have specific water and drainage pipes which can be tricky to plan around. We can help.

BROGRUND Wash-basin mixer tap with sensor, chrome-plated
Story

Water-conscious commitment in bathrooms

Every time you brush your teeth, wash your hands, shave or take a bath, you can help with something essential – saving water. That’s why all our taps have an aerator that saves water and energy while keeping the water stream just right. But that’s just a small part of a bigger effort: conserving more clean water than we use.

Antony Smith, an engineer from England, remembers when he joined IKEA and the small team that develops our taps and showers. "I realized we practice what we preach about sustainability," Antony says. "It's a refreshing experience, but it makes our job really difficult because we genuinely have to deliver on sustainability with each product."

Water is precious, but often taken for granted

So, why conserving water? Because no organism on earth can survive without it, and no new water is created. It's constantly recycled, but our freshwater supply is overused and not evenly distributed. It’s impacted by pollution, contamination and climate change, too. "Those of us who live where you can just turn on your tap may not think about saving water; it's taken for granted," Antony says.

Thinking about water at every step

Behind the scenes, we constantly explore new ways to improve water efficiency. That includes providing factory workers and their families with fresh drinking water, ensuring all factory water is cleaned before release, reducing water usage in textile production and using rainwater to flush toilets in stores. And now we are working on new taps using sensors and spray technology – and new water-efficient showers – to save even more. Every water-saving action adds up.

Material

What are zinc and zamak?

Zinc is a metallic element while zamak is a mixture of zinc, aluminium, magnesium and copper. Both are durable materials and easy to cast into different shapes. They are good at conducting heat and electricity. Objects made of zinc or zamak are often given a surface treatment to resemble metals like gold, brass or stainless steel. Both zinc and zamak retain their good properties when they are recycled to become new objects.

Get the look

Ideas based on your recently viewed products

Skip listing