BEMÖTA Wall mounted extractor hood, stainless steel colour, 70 cm
Complete with
How to get it
5 year guarantee
A sleek, angled hood in stainless steel with visible filters and spot-on industrial vibe. LED lighting strip effectively illuminates the cooking surface and can be dimmed when your food is ready to serve.
Product details
5 year guarantee. Read about the terms in the guarantee brochure.
Can be installed in two ways, either ducted to the outside or in recirculation mode fitted with charcoal filter.
3 speed settings allow you to increase or decrease the hood’s power at the push of a button, depending on your cooking needs.
Dimmable LED strip included; effectively illuminates the cooking surface and provides energy saving.
You can easily remove and clean the grease filter in the dishwasher.
The vertical angle of the fan allows you to easily see and reach saucepans and frying pans on the hob.
IKEA of Sweden
Good to know
Extraction rate in exhausting mode with booster function: 700 m³/h.
Extraction rate in exhausting mode: 380 m³/h.
Noise level at max. exhaust speed: 60 dB (A).
Extraction rate in re-circulation mode: 365 m³/h.
Noise level at max. re-circulation speed: 78 dB (A).
Voltage: 220-240V.
Wall mounted extractor hood with 3 different speeds and booster function.
Charcoal filter sold separately.
You will find complete information about the installation and use of this product under the tab Assembly instructions & user manual.
Materials and care
Care
Clean surfaces with a soft cloth dampened with water and a mild washing-up detergent/soap or a cleaning detergent specifically designed for the appliance.
Never use corrosive or abrasive detergents, abrasive sponges, scourers or metallic scrapers.
Safety and compliance
Assembly and documents
Assembly instructions
BEMÖTA Wall mounted extractor hood703.921.51BEMÖTA Wall mounted extractor hood703.921.51Advice and care instructions
BEMÖTA Wall mounted extractor hood703.921.51BEMÖTA Wall mounted extractor hood703.921.51Measurements
- Width: 69.8 cm
- Depth: 38.1 cm
- Min. height extraction: 80.2 cm
- Max. height extraction: 105.2 cm
- Min. height recirculation: 91.2 cm
- Max. height recirculation: 117.2 cm
- Width of chimney: 29.8 cm
- Depth of chimney: 20.0 cm
- Weight: 16.50 kg
- Cord length: 110.0 cm
- Motor power: 270 W
Packaging
BEMÖTA
Article Number703.921.51- Width: 60 cm
- Height: 51 cm
- Length: 79 cm
- Weight: 21.00 kg
- Package(s): 1
Reviews
Customer reviews
Quality
Sensitive to noise or have an open-plan home?
For extractor hoods, a noise level below 60 dB is considered low – roughly equivalent to a normal conversation between two people. We measure the noise level of our hoods at max speed, making it easier to compare different models. Note that sound levels decrease at lower speeds, and recirculating hoods are typically louder than those vented outdoors. Noise may also increase if the ducting is long or has several bends, as the air has to work harder to pass through the system.
Function solution
Sound levels
Sound levels for appliances are measured in decibels (dBs). Our extractor hoods have been tested in speed 3 to determine the dB level. The sound level of your extractor hood is affected by: • Type of installation. Exhaust-mode or recirculation-mode. • Length and diameter of the exhaust pipe between extractor and exhaust vent. The longer it is and the smaller the diameter, the louder it gets. • 90° bends. The more bends you have in the exhaust pipe, the greater the sound.