PLATSA Chest of 3 drawers, white/Sannidal white, 60x57x73 cm
Price £ 125
Knobs and handles are sold separately.
How to get it
Available services
Build your PLATSA storage as you want it – high or low, under a sloping ceiling or along an entire wall. It assembles in minutes with a simple “click”. Finish with doors and interior organisers as needed.
Article Number094.878.55
Product details
SANNIDAL has a traditional yet simple and clean expression that will fit most homes. Add a personal touch with knobs or handles that you like.
It’s easy to adapt PLATSA storage combinations according to your needs by simply adding (or removing) frames, doors, interiors, exteriors, feet or suspension rails.
The frame is easy to install by just clicking it together, no tools are needed.
LÄTTHET legs raise your PLATSA combination from the floor, giving a light airy look and making it easy to clean the floor underneath.
Adjustable feet make it possible to compensate any irregularities in the floor.
With PLATSA home planner tool, you can easily create a solution that is adapted to you, your home and your storage needs.
Good to know
Knobs and handles are sold separately.
Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.
The drawer holds about 8 pairs of folded trousers or 16 T-shirts.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Materials and care
Material
Frame
Fibreboard, Paper foil, Particleboard, Honeycomb structure paper filling (100% recycled)
Drawer front
- Frame:
- Particleboard, Paper foil, Plastic edging
- Middle panel:
- Fibreboard, Paper foil
Drawer without front
- Basematerial:
- Steel, Epoxy/polyester powder coating
- Wheel:
- Acetal plastic
- Drawer bottom:
- Fibreboard, Plastic foil
Top for storage module
Particleboard, Paper foil
Leg
- Outer tube/ Inner tube/ Insert nut:
- Steel, Epoxy powder coating
- Washer:
- Steel, Galvanized
- Threaded sleeve/ Foot:
- Reinforced polyamide plastic
Care
Frame/drawer front/drawer without front/top for storage module/leg
Wipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
Safety and compliance
This furniture must be fixed to the wall with the enclosed wall fastener.
Assembly and documents
Assembly instructions
PLATSA Frame103.309.72HJÄLPA Drawer without front603.309.79SPILDRA Top for storage module203.316.93LÄTTHET Leg503.955.94Advice and care instructions
PLATSA Frame103.309.72SANNIDAL Drawer front105.264.55SPILDRA Top for storage module203.316.93Disassembly instructions
PLATSA Frame103.309.72Weight & measurements
- Width: 60 cm
- Depth: 57 cm
- Height: 73 cm
Package details
This product comes as 9 packages.
PLATSA
Article Number103.309.72- Width: 56 cm
- Height: 9 cm
- Length: 67 cm
- Weight: 10.34 kg
- Package(s): 1
SANNIDAL
Article Number105.264.55- Width: 20 cm
- Height: 2 cm
- Length: 68 cm
- Weight: 1.29 kg
- Package(s): 3
HJÄLPA
Article Number603.309.79- Width: 55 cm
- Height: 5 cm
- Length: 61 cm
- Weight: 3.52 kg
- Package(s): 3
SPILDRA
Article Number203.316.93- Width: 58 cm
- Height: 2 cm
- Length: 70 cm
- Weight: 4.75 kg
- Package(s): 1
LÄTTHET
Article Number503.955.94- Width: 13 cm
- Height: 4 cm
- Length: 14 cm
- Weight: 0.78 kg
- Package(s): 1
Reviews
Poor quality control & tolerancesAnonymous reviewer-Poor tolerances everywhere. Drawer fronts are not level, nor equally spaced to each other, nor equally spaced from the carcass. They're uneven in every dimension. Looks rough, with no adjustability. Pot luck if you get a good one.
-Drawers do not hold square - takes a little wiggling but unsure if it will slip out over time
-Top plate is *not* symmetric - if you put it on the wrong way then the drawer fronts will stick out. Instructions only make this clear at the end - poor! But even right way round it is not quite flush with the drawer fronts.
-You can remove the plastic pins that hold in the top and other parts, but you need some thin plastic or metal to get underneath and lever up.
-Drawers come out quite far, only leaves ~15cm behind the front of the carcass.
-Drawer assembly was much harder than usual rotating grabbing nuts. Some of the plastic sliders required a lot of force & hammer. I understand Ikea are reducing the parts requiring tools, but tolerances must be better
It's great!Anonymous reviewerI want to balance out the 1-star reviews and say that actually my experience with attaching the fronts was totally fine... You just need to make sure they are aligned and that it is all held together properly. Super quick and easy.
Good value and smart looking Anonymous reviewerMaybe not our simplest IKEA build but very pleased with the look and the build when it was completed.
Solid build but a couple of flawsAnonymous reviewerThe clip together system saves time and for best results do this on a solid surface not carpet. Some drawers in the ikea range have a support bracket in the middle of the drawer which stops the bottom panel from sagging. They are not in this drawer system so not as robust. The platsa designer app allows knobs to be specified for the drawers and even shows them on the 3D view and includes them in the parts list when purchasing. But the fonnes drawer fronts are blank and don’t have a part drilled hole in the back for location of knobs. Otherwise a cleverly designed and solid unit
Easier than expectedAnonymous reviewerI was a little apprehensive about buying this after reading previous reviews, but I was pleasantly surprised.
The drawers are assembled differently to previous IKEA drawers I've built, so the first one took a little while understanding the instructions and ensuring I'd followed them exactly. However, once you understand how they go together, they're much faster to build than the old design of drawer.
My only gripe is that the step where you follow one set of instructions for the bottom drawer, and a different set for the other drawers is hard to understand: Does a picture of a grey bottom drawer and white top drawers mean "this only applies to the bottom drawer", or is it the other way around?
Really poor qualityAnonymous reviewerI love IKEA products and they are always my first go to when wanting new furniture. For the price I've paid for these drawers, they are so cheap and disappointing. I can't even get the unit to fit together so will be returning it. Although IKEA will now say I can't as I've opened the packaging.
Awful productAnonymous reviewerI wish I’d read the reviews but the Platsa wardrobes were easy.
Not so much the drawers the plastic pegs to attach front are to flimsy and impossible to fit if they go in wrong you cannot get them out if you can get them in at all as for the top again plastic screws one would not go in and then the top overhangs front and back but not enough lip at front to cover draw… will be taking back in one piece as you can’t dismantle 🤬
Do not buy this!Anonymous reviewerSo different from anything I have every purchased from ikea. Instructions were incomprehensible, you needed three people to assemble. The making of the drawers was unbelievably hard, the plastic fitting for front of drawers is impossible to fit unless you end up doing what we did. Get a wooden spoon and bang with another piece of wood. Worst thing ever bought from IKEA, so disappointed with end product.
Nice drawersAnonymous reviewerSmooth drawers and fit everything we needed to put in
Customer reviews
3.1Average rating
9Reviews