SILVERGLANS / RODRET Lighting kit, white, 24 "

Product details

• Good to know

  A flashing light indicates when the maximum wattage for the LED driver is exceeded.

  With RODRET wireless dimmer, you can dim your lighting without a wired-in installation.

  The dimmer has a maximum range of 33 ft when not blocked by walls.

  Dimmable with RODRET wireless dimmer, sold separately.

  This product is part of our smart home range. Connect it, along with other smart products, to DIRIGERA hub and IKEA Home smart app for more features and functions.

  Includes: 1 driver for wireless control (30W), 1 wireless dimmer and 1 white lighting strip (60 cm).

  Works with IKEA Home smart.

  Can only be used with IKEA Smart lighting products.

  Built-in LED light source.

  Not suitable for use with hardwired dimmers.

  The light source has a lifetime of approx. 25,000 hours. This corresponds to about 20 years if the lamp is on for 3 hours per day.

  Color Rendering Index (CRI): >90.

  Special waste handling may be required. Please contact your local authorities for more information.

  You can connect as many LED light strips as you like, as long as the total wattage of the products does not exceed the maximum wattage of the connected driver(s).

  Power consumption standby/off mode: <0.3W.

  Output voltage 24V.

  Voltage: 220-240V.

• Materials and care

  Material

  LED bathroom lighting strip

  Lamp house:

  Aluminum, Powder coating

  Diffuser:

  Polycarbonate plastic

  Bracket:

  ABS plastic (min. 20% recycled)

  Driver for wireless control

  Mounting plate:

  Steel

  Cover:

  Polycarbonate plastic

  Wireless dimmer/power switch

  Top part/ Battery box/ Lid:

  ABS plastic

  Gasket:

  Synthetic rubber

  Wall Fitting:

  Steel

  Magnet:

  Neodymium

  Care

  LED bathroom lighting strip/driver for wireless control/wireless dimmer/power switch

  Wipe clean with a dry cloth.

• Safety and compliance
  In some countries electrical installation work may only be carried out by an licensened electrician. Contact your local electricity authority for advice.If you plan to use SILVERGLANS driver in a bathroom, it must be connected to your existing wired-in electrical installation.This product bears the CE mark.Approved for IP44.This product bears the CE mark.
• Assembly and documents

  Assembly instructions

  SILVERGLANS LED bathroom lighting strip304.396.50SILVERGLANS Driver for wireless control504.748.26RODRET Wireless dimmer/power switch805.598.00

  Advice and care instructions

  SILVERGLANS Driver for wireless control504.748.26RODRET Wireless dimmer/power switch805.598.00RODRET Wireless dimmer/power switch805.598.00