TÄRNKULLEN Upholstered bed frame, Tibbleby beige/gray, Queen
Complete with
How to get it
Checking availability...Collect 329 points with
It's OK to change your mind
Low Price Guarantee
More ways to pay
This bed frame has a soft cover with a tight fit, snug look and carefully sewn details. The cover can be removed and machine washed – so that the bed stays fresh year after year
- Washable cover
Material
Cover for bed frame- Fabric:
- 100% polyester (min. 90% recycled)
- Filling:
- 100% polyester (min. 70% recycled)
- Lining/ Back fabric:
- 100 % polyester (100% recycled)
- Lining, underside:
- 100 % polypropylene
Upholstered bed frame- Smolder resistant lining:
- Polyester wadding
- Midbeam:
- Laminated veneer lumber
- Top frame/ Bottom frame/ Footboard/ Bedside:
- Laminated veneer lumber, Fiberboard
- Filling:
- Polyurethane foam 2.0 lb/cu.ft., Polyester wadding
- Leg:
- Solid wood, Oak veneer, Clear acrylic lacquer
- Hook and loop fastener:
- Polyamide
- Cross-brace:
- Steel, Galvanized
Care
FrameUpholstered bed frameWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
CoverCover for bed frameMachine wash warm, normal cycle.
To be washed separately.
Do not bleach.
Iron low.
Dry clean any solvent except trichloroethylene.
Line dry.
Only iron on the front side.
Assembly instructions
TÄRNKULLEN Cover for bed frame005.849.50TÄRNKULLEN Upholstered bed frame305.876.45
The entire cover is removable and machine washable, making your bed easy to keep clean and use for a long time. The cover comes in two pieces, so it’s easy to remove and put back on.
The soft cover has a timeless look with decorative details and a slightly wider headboard that gives the bed a unique look.
The strong and sturdy wooden legs made of solid oak enhance the warm and natural look of the bed frame.
The cover is made from the dope-dyed fabric Tibbleby of which at least 90% is recycled polyester. It has a slight luster and a discreet herringbone pattern.
The back of the headboard is finished with a grey fabric.
Combine this bed frame with a slatted bed base with a max. thickness of 1⅝" to keep the slats hidden in the frame. The slats of a higher bed base may be visible along the sides of the bed.
Center support beam included.
Slatted bed base and mattress sold separately.
Material
Cover for bed frame- Fabric:
- 100% polyester (min. 90% recycled)
- Filling:
- 100% polyester (min. 70% recycled)
- Lining/ Back fabric:
- 100 % polyester (100% recycled)
- Lining, underside:
- 100 % polypropylene
Upholstered bed frame- Smolder resistant lining:
- Polyester wadding
- Midbeam:
- Laminated veneer lumber
- Top frame/ Bottom frame/ Footboard/ Bedside:
- Laminated veneer lumber, Fiberboard
- Filling:
- Polyurethane foam 2.0 lb/cu.ft., Polyester wadding
- Leg:
- Solid wood, Oak veneer, Clear acrylic lacquer
- Hook and loop fastener:
- Polyamide
- Cross-brace:
- Steel, Galvanized
Care
FrameUpholstered bed frameWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
CoverCover for bed frameMachine wash warm, normal cycle.
To be washed separately.
Do not bleach.
Iron low.
Dry clean any solvent except trichloroethylene.
Line dry.
Only iron on the front side.
- This bed frame has been tested and meets the requirements for safety, durability and stability set forth by standard EN1725.
Assembly instructions
TÄRNKULLEN Cover for bed frame005.849.50TÄRNKULLEN Upholstered bed frame305.876.45

This product is made up of more than one component. You can find the details of these components below.

















