Product details
The entire cover is removable and machine washable, making your bed easy to keep clean and use for a long time. The cover comes in two pieces, so it’s easy to remove and put back on.
The soft cover has a timeless look with decorative details and a slightly wider headboard that gives the bed a unique look.
The sturdy oak legs complete the look.
The cover is made from the dope-dyed fabric Tibbleby of which at least 90% is recycled polyester. It has a slight luster and a discreet herringbone pattern.
The soft, padded headboard is comfortable to lean against while reading or watching TV in bed.
You can easily vacuum under the bed frame to keep the space clean and dust-free.
The bed frame is easy to assemble and has a lightweight and sturdy construction.
You can buy an additional cover separately – in the same style or with a different expression if you want some variety
LURÖY slatted bed base with curved slats helps to absorb your body weight and supports your body, while the open construction allows air to circulate and keeps the mattress fresh.
The back of the headboard is finished with a grey fabric.
LURÖY slatted bed base is included in the price, but is packaged separately.
Center support beam included.
Mattress and bedlinens are sold separately.
- Back fabric/ Lining:
- 100 % polyester (100% recycled)
- Fabric:
- 100% polyester (min. 90% recycled)
- Filling:
- 100% polyester (min. 70% recycled)
- Lining, underside:
- 100 % polypropylene
- Smolder resistant lining:
- Polyester wadding
- Midbeam:
- Laminated veneer lumber
- Top frame/ Bottom frame/ Footboard/ Bedside:
- Solid wood, Laminated veneer lumber, Fiberboard
- Filling:
- Polyurethane foam 2.0 lb/cu.ft., Polyester wadding
- Leg:
- Solid wood, Oak veneer, Clear acrylic lacquer
- Hook and loop fastener:
- Polyamide
- Cross-brace:
- Steel, Galvanized
- Bed slats:
- Layer-glued wood veneer, Adhesive resin as coating
- Ribbon:
- 100 %polyester
Wipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
Machine wash warm, normal cycle.
To be washed separately.
Do not bleach.
Iron low.
Dry clean any solvent except trichloroethylene.
Line dry.
Only iron on the front side.
This bed frame has been tested and meets the requirements for safety, durability and stability set forth by standard EN1725.
Measurements
- Footboard height: 16 1/8 "
- Headboard height: 44 1/8 "
- Length: 78 3/8 "
- Mattress length: 74 3/8 "
- Mattress width: 53 1/8 "
- Width: 60 5/8 "
- Free height under bed: 7 1/2 "
This product comes as 3 packages.
Cover for bed frameArticle Number905.848.23- Width: 14 ½ "
- Height: 3 ½ "
- Length: 22 "
- Weight: 4 lb 10 oz
- Package(s): 1
Upholstered bed frameArticle Number005.876.42- Width: 29 "
- Height: 5 ¼ "
- Length: 80 ¼ "
- Weight: 67 lb 9 oz
- Package(s): 1
Slatted bed baseArticle Number302.927.85- Width: 8 ¼ "
- Height: 4 ¼ "
- Length: 26 ½ "
- Weight: 21 lb 10 oz
- Package(s): 1
Reviews
Solid mattress frame for a good priceJohnEasy to assemble, works well, good rest. Recommended for both young folks looking for their first adult mattress and also us older folks looking for our last and final rest. 5
Broke in half within a few weeksCaitlinDO NOT BUY! This is a failed product design that needs to be discontinued. The footboard of the bed snapped in half a few weeks after we assembled and started sleeping on it. I'm 165 lbs, my husband is 180 lbs, neither of us are particularly large people. It broke when I sat on it, there was no jumping or anything. IKEA replaced the broken frame and as soon as we opened it and began assembly we noticed that the exact same problem is going to happen with the new frame too. It's a design flaw. There is a stapled wood joint in the footboard made from a few extremely flimsy, splintery pieces of wood no more than 1-2" in thickness. The staples pass through a finger groove joint where the metal staples are causing the wood to splinter and ultimately break. Unfortunately this design will never be durable as long as they keep building it this way. I really wanted to like this frame, it looks lovely and I love the washable cover! :(1
No opinionPerryThe bed is junk. The first time I sat on the edge of the bed the foot board broke in half which was replaced by iKEA. We had no problems with the bed until a few weeks ago when I sat on it and once again it snapped in half. I weigh 220 lbs so that may be the problem but no the less it broke and I was hesitant to go through the processes again. So I purchased an eight foot 2x4 and reinforced the frame myself. So when I decide to replace this bed I will know to purchase a sturdier one probably somewhere else.1
I ABSOLUTELY LOVE THIS BED FRAME!!!!NandiniThis bed is incredible! It is so well made and super sturdy. It definitely looks high end. I wanted a bed frame with a bed skirt and the skirt is made with thick material and the Velcro is brilliant, the bed skirt stays in place. The lines are classic and timeless and I hope that vendors on Etsy and other sites make slipcovers for this bed frame in different patterns. If you are on the fence, BUY THIS BED, you will not be disappointed.5
