Product details
Soft edges, recessed handles and just a few visible fittings make the bedframe safe and give it a clean design.
You can easily adapt the timeless look based on your taste and personal style by completing with different bed textiles, pillows and accessories.
The padded headboard gives SLÄKT bed a warm, soft and cozy feel.
It only takes a few steps to assemble and mount the headboard to SLÄKT bed.
The cover is easy to remove and wash.
The drawers are easy to open and spacious enough with room for toys, clothes and other gadgets that teenagers usually like to "store" on the floor.
If you need extra storage close at hand, you can hang MÖJLIGHET bed pocket over the headboard or footboard of the bed.
The shelf section can be attached at the headboard or footboard of the bed.
The slats are spaced to offer good support for both spring and foam mattresses.
The curved slats with a springy feel adjust to your body weight and create a supple foundation for the mattress.
You can also use the bed as a room divider since the back is covered and lacquered in the same color as the rest of the frame.
Max load indicates static weight, in other words the load which the bed withstands if you lie or sit on it.
Mattress and bedlinens are sold separately.
- Footboard/ Headboard/ Drawer front:
- Fiberboard, Acrylic paint
- Bedside:
- Particleboard, Acrylic paint, Acrylic paint, Paper foil, Plastic edging
- Back part:
- Fiberboard, Particleboard, Honeycomb structure paper filling (100% recycled), Acrylic paint, Paper foil, Acrylic paint, Paper foil, Plastic edging
- Rail:
- Fiberboard, Particleboard, Plastic foil
- Side:
- Particleboard, Acrylic paint, Acrylic paint, Plastic edging
- Shelf:
- Fiberboard, Particleboard, Acrylic paint, Acrylic paint, Paper foil, Plastic edging
- Bottom:
- Particleboard, Fiberboard, Acrylic paint, Acrylic paint, Paper foil, Plastic edging
- Back:
- Particleboard, Acrylic paint, Paper foil, Plastic edging
- Drawer side:
- Particleboard, Plastic foil, Paper foil, Plastic edging
- Drawer back:
- Particleboard, Plastic foil, Paper foil
- Drawer bottom:
- Fiberboard, Acrylic paint, Paper foil
- Bed slats:
- Layer-glued wood veneer, Adhesive resin as coating
- Ribbon:
- 100 %polyester
- Fabric:
- 100% polyester (min. 90% recycled)
- Headboard:
- Particleboard, High-pressure melamine laminate, Plastic edging
- Headboard cover:
- 100 %polyester, 100 % polypropylene
- Lining:
- 100 % polypropylene, Felt liner
- Smolder resistant lining:
- Polyester wadding
It is important not to screw hooks or handles onto the bed or hang ropes or belts in which children can get caught when playing.To avoid the risk of serious injury, the distance between the bed and the wall must always be less than 2½" or more than 9".
Measurements
- Length: 77 1/8 "
- Width: 40 1/2 "
- Headboard height: 35 "
- Footboard height: 28 "
- Mattress width: 38 1/4 "
- Mattress length: 74 3/8 "
- Max. load: 220 lb
- Shelf width: 12 5/8 "
- Shelf depth: 13 3/4 "
- Drawer width (inside): 28 3/8 "
- Drawer depth (inside): 22 1/2 "
- Height of drawer (inside): 5 1/2 "
- Maximum load/drawer: 33 lb
This product comes as 6 packages.
Bed frame with storageArticle Number103.629.82This product has multiple packages.
- Width: 16 ¼ "
- Height: 2 "
- Length: 80 ¾ "
- Weight: 41 lb 7 oz
- Package(s): 1
- Width: 34 ½ "
- Height: 2 ¼ "
- Length: 42 "
- Weight: 59 lb 12 oz
- Package(s): 1
- Width: 20 ¼ "
- Height: 2 "
- Length: 80 ¾ "
- Weight: 43 lb 14 oz
- Package(s): 1
- Width: 36 ¼ "
- Height: 2 ¼ "
- Length: 42 ¼ "
- Weight: 60 lb 3 oz
- Package(s): 1
Slatted bed baseArticle Number601.602.17- Width: 9 ½ "
- Height: 2 "
- Length: 38 "
- Weight: 17 lb 3 oz
- Package(s): 1
Headboard with coverArticle Number405.940.99- Width: 14 ½ "
- Height: 2 "
- Length: 41 ½ "
- Weight: 8 lb 4 oz
- Package(s): 1
