Freddy shows how the frames can be arranged vertically, horizontally or like steps, to then be completed with shelves, wire baskets, clothes rail, drawers and doors. "Even the exterior can be used. You can place hooks there or a clothes rail which is fixed between two frames."
PLATSA Chest of 2 drawers, white/Fonnes white, 60x57x53 cm
Price £ 92
Knobs and handles are sold separately.
How to get it
Available services
Build your PLATSA storage as you want it – high or low, under a sloping ceiling or along an entire wall. It assembles in minutes with a simple “click”. Finish with doors and interior organisers as needed.
Article Number092.772.11
Product details
The frame is easy to install by just clicking it together, no tools are needed.
LÄTTHET legs raise your PLATSA combination from the floor, giving a light airy look and making it easy to clean the floor underneath.
Adjustable feet make it possible to compensate any irregularities in the floor.
With PLATSA home planner tool, you can easily create a solution that is adapted to you, your home and your storage needs.
Designer
IKEA of Sweden/Ola Wihlborg
Good to know
Knobs and handles are sold separately.
Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.
The drawer holds about 8 pairs of folded trousers or 16 T-shirts.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Materials and care
Material
Frame
Fibreboard, Paper foil, Particleboard, Honeycomb structure paper filling (100% recycled)
Drawer front/ top for storage module
Particleboard, Paper foil
Drawer without front
- Basematerial:
- Steel, Epoxy/polyester powder coating
- Wheel:
- Acetal plastic
- Drawer bottom:
- Fibreboard, Plastic foil
Leg
Solid wood, Acrylic paint
Care
Frame/drawer front/drawer without front/top for storage module/leg
Wipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
Safety and compliance
This furniture must be fixed to the wall with the enclosed wall fastener.
Assembly and documents
Assembly instructions
PLATSA Frame903.309.49HJÄLPA Drawer without front603.309.79SPILDRA Top for storage module203.316.93LÄTTHET Leg103.955.91Advice and care instructions
PLATSA Frame903.309.49FONNES Drawer front803.859.23SPILDRA Top for storage module203.316.93Disassembly instructions
PLATSA Frame903.309.49Weight & measurements
- Width: 60 cm
- Depth: 57 cm
- Height: 53 cm
Package details
This product comes as 7 packages.
PLATSA
Article Number903.309.49- Width: 56 cm
- Height: 9 cm
- Length: 62 cm
- Weight: 9.10 kg
- Package(s): 1
FONNES
Article Number803.859.23- Width: 20 cm
- Height: 2 cm
- Length: 68 cm
- Weight: 1.57 kg
- Package(s): 2
HJÄLPA
Article Number603.309.79- Width: 55 cm
- Height: 5 cm
- Length: 61 cm
- Weight: 3.52 kg
- Package(s): 2
SPILDRA
Article Number203.316.93- Width: 58 cm
- Height: 2 cm
- Length: 70 cm
- Weight: 4.75 kg
- Package(s): 1
LÄTTHET
Article Number103.955.91- Width: 14 cm
- Height: 7 cm
- Length: 24 cm
- Weight: 1.34 kg
- Package(s): 1
Reviews
Platsa units bought to fit into awkard spaces under the sloping roof. Ideal for our needs.Anonymous reviewerThe instructions were good and after assembling several pieces were no longer needed at assembly is quite straightforward. The only more difficult part was fixing the drawer slider pieces inside the cabinets. There are screws that need to be on the top row of holes under the unit tops which is very fiddly. Worked out the best way is to lie the unit on its back which is easier than trying to fix them with it upright. Also, the top draw is difficult to put in because there is a screw or fixing for either the unit top or the another unit on top - and the screw/fixing is slightly in the way of inserting the top drawer. But overall, very good.
Difficult drawers, check instructions carefullyAnonymous reviewerOk, the instructions for this were not very clear but once you work it out it seems so obvious. Bottom and top drawer have different instructions so watch out!!! The bottom drawer requires you to NOT use the two toppers and bin them. Assemble as instructed in step 5. For the top drawer, you need to use the toppers, as stated in PAGE 12 (not step 12, which there isn’t).
You are welcome :)
Customer reviews
4Average rating
2Reviews
Accessories for PLATSA
Story
The storage that changes with you
Our living space is often limited, and it can be a challenge to find a place for everything. With PLATSA storage system, we wanted to create a simple, changeable storage solution that you can rebuild and add to, build vertically or horizontally, to the side or in between. On top of everything else, the price should be low but the quality should be high. The solution: the right quality in the right place.
"All you need is your hands," says product developer Freddy Kramer while clicking together one PLATSA frame after another. Yes, clicking. The secret is a type of plug called a wedge dowel. Freddy goes on to explain why assembling or taking frames apart easily is an important detail. "People's lives are changing more and more today ─ we move more often, live in smaller spaces and maybe share a home with others at times. That's why our needs don't look the same throughout life."
Take apart and rebuild
Love in a white box
For PLATSA to be truly long-lasting, quality was just as important as flexibility and ease of assembling. But improving quality without adding to the price is not easy. "Right quality in the right place," Freddy says, and opens a cabinet door. "Here on the outside of the door, which you see and touch every day, we've used a matt foil with fine texture, while the inside, which is not as exposed, is coated with a simpler base foil." The PLATSA project took a lot of time and commitment. But it also gave results. "Those empty white boxes for the frames might not look like much at first glance, but they’re actually white boxes filled with love,” Freddy says, smiling.
Material
What is constructed board?
We use constructed boards when manufacturing many of our pieces of furniture, such as tables and wardrobes. They are light yet still stable and strong. Each board has a frame made of chipboard, fibreboard or solid wood, while the inside is a honeycomb filling structure made of mostly recycled paper, which is extra durable thanks to its special construction. The board is then covered with a protective paint, foil or veneer depending on the style wanted.