IDANÄS Upholstered ottoman bed, Naggen beige, Standard King
How to get it
Checking availability...Collect 139 points with
It's OK to change your mind
The sloping headboard and soft upholstery make IDANÄS ottoman bed extra comfortable. Classic button detailing is timeless, while the space under the bed adds generous everyday storage.
Material
- Top frame/ Bottom frame:
- Plywood, Fibreboard, Laminated veneer lumber, Particleboard
- Filling:
- Polyurethane foam 30 kg/cu.m.
- Footboard/ Bedside:
- Fibreboard, Laminated veneer lumber, Polyester wadding
- Bed base:
- Steel, Epoxy/polyester powder coating
- Bed slats:
- Layer-glued wood veneer, Birch veneer, Adhesive resin as coating
- Bottom/ Lining, underside:
- 100% polypropylene
- Wadding:
- 100 % polyester
- Lining:
- 65 % polyester, 26% modacrylic, 9% cotton
- Hook and loop fastener:
- Polyamide plastic
- Fabric:
- 76% polyester (min. 90% recycled), 18% modacrylic, 6% cotton
Care
Vacuum clean.
Wipe clean with a cloth dampened in a mild cleaner.
The cover is not washable.
Assembly instructions
IDANÄS Upholstered ottoman bed405.909.49
IDANÄS upholstered ottoman bed has a thick, sloping headboard that provides comfortable support for your back - perfect for lazy mornings and long evenings when reading a newspaper or a book in bed.
The storage space under the bed holds everything from extra duvets and pillows to seasonal clothes. Or why not the ironing board?
It’s easy to access your things under the bed thanks to the integrated lift mechanism. Simply pull the strap and the base lifts smoothly and easily.
The ottoman’s storage space has a protective lining as its base, which keeps your things off the floor and helps to keep them clean and dust free.
Mattress and bedlinen are sold separately.
Slatted bed base and midbeam are included.
The back of the headboard is finished with a grey fabric.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Material
- Top frame/ Bottom frame:
- Plywood, Fibreboard, Laminated veneer lumber, Particleboard
- Filling:
- Polyurethane foam 30 kg/cu.m.
- Footboard/ Bedside:
- Fibreboard, Laminated veneer lumber, Polyester wadding
- Bed base:
- Steel, Epoxy/polyester powder coating
- Bed slats:
- Layer-glued wood veneer, Birch veneer, Adhesive resin as coating
- Bottom/ Lining, underside:
- 100% polypropylene
- Wadding:
- 100 % polyester
- Lining:
- 65 % polyester, 26% modacrylic, 9% cotton
- Hook and loop fastener:
- Polyamide plastic
- Fabric:
- 76% polyester (min. 90% recycled), 18% modacrylic, 6% cotton
Care
Vacuum clean.
Wipe clean with a cloth dampened in a mild cleaner.
The cover is not washable.
- For this ottoman bed you need to use a mattress with a maximum weight of 50 kg. If the mattress exceeds the maximum weight, the slatted base can suddenly fall and cause injury.This cover’s ability to resist abrasion has been tested to handle 50,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.The cover has a lightfastness level of 5-6 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.
Assembly instructions
IDANÄS Upholstered ottoman bed405.909.49

- 405.909.49
1 × IDANÄS
Upholstered ottoman bedPackage 1- Width: 37 cm
- Height: 11 cm
- Length: 203 cm
- Weight: 22.36 kg
Package 2- Width: 51 cm
- Height: 15 cm
- Length: 163 cm
- Weight: 25.63 kg
Package 3- Width: 74 cm
- Height: 20 cm
- Length: 162 cm
- Weight: 17.36 kg
Package 4- Width: 21 cm
- Height: 16 cm
- Length: 204 cm
- Weight: 27.95 kg










