STARKVIND Table with air purifier, additional gas filter stained oak veneer/dark brown
How to get it
Both a side table and an air purifier that improves the indoor air quality. STARKVIND can be adjusted manually, set to auto mode or be connected to DIRIGERA hub for full control via IKEA Home smart app.
The air purifier can be set to auto mode, which means that it automatically detects the particles (PM2.5) in the air and then adjusts the fan speed, so you can think about other things.
By connecting STARKVIND to DIRIGERA hub, you can control the air purifier in the IKEA Home smart app.
In the IKEA Home smart app, you can do even more, such as use timers to clean the air before you go to bed.
You can sleep with the air purifier on since it is very quiet at the lower fan speeds. If connected to the IKEA Home smart app, you can also turn the LED light off on the unit when going to sleep.
You can hide the cable in one of the table legs and inside the air purifier to avoid cable clutter.
This product is part of our smart home range. Connect it, along with other smart products, to DIRIGERA hub and IKEA Home smart app for more features and functions.
Purifies the air in a space of up to 20 square metres, depending on which fan speed the air purifier is set to.
It will take longer time to purify the air if the room is larger than 20 square meters, but you can always use several air purifiers to cover a larger area.
The particle filter is optimised to filter away approximately 99.5 percent of smaller airborne particles such as PM2.5 particles, dust and pollen.
PM2.5 are small inhalable particles, that measure 0.1-2.5 micrometres.
The gas filter purifies the air from various gaseous pollutants such as formaldehyde, which can be found in things like cleaning/ household products and various fabrics and materials in your home.
The gas filter helps to reduce the odour of smoke, cooking odours and other unpleasant odours that may be present in the home.
You can set the air purifier to 5 different fan speeds and thereby adapt it to the needs of your home, or you can use it in auto mode.
The air purifier comes with a particle filter and a gas filter so it purifies the air from various pollutants as efficiently as possible. You can also buy extra particle and/or gas filters as replacements.
Check the filter regularly to see if it’s dirty. An LED indicator illuminates when you need to check your filters and possibly replace them. The filter is recommended to be replaced within 6 months.
The particle filter is tested according to EN 1822-1 and ISO 29463-3 which corresponds to class EPA12.
Clean Air Delivery Rate (CADR) with particle and gas filter or only particle filter: Lowest fan speed 45/50 m3/h, highest fan speed 240/260 m3/h.
Noise level with particle and gas filter or only particle filter: Lowest fan speed 24/24 dB, highest fan speed 51/53 dB.
Power consumption with particle and gas filter or only particle filter: Lowest fan speed 1.9/2W, highest fan speed 25/33W.
Table with air purifier
Plywood, Tinted clear lacquer, Oak veneer, Tinted clear lacquer
Solid birch, Tinted clear lacquer
Cover/ Lower body/ Fixing plate/ Knob:
Filter for gas cleaning
Place the table with air purifier where the flow of air is not blocked by other objects.