PLATSA Bedside table, white/Kalbåden lively pine effect, 60x42x83 cm
How to get it
Checking availability...Collect 26 points with
It's OK to change your mind
Build your PLATSA storage as you want it – high or low, under a sloping ceiling or along an entire wall. It assembles in minutes with a simple “click”. Finish with doors and interior organisers as needed.
Material
FrameFibreboard, Paper foil, Particleboard, Honeycomb structure paper filling (100% recycled)
Drawer without front- Basematerial:
- Steel, Epoxy/polyester powder coating
- Wheel:
- Acetal plastic
- Drawer bottom:
- Fibreboard, Plastic foil
Drawer front/ top for storage moduleParticleboard, Paper foil
ShelfParticle- and fibreboard with honeycomb paper filling (100% recycled paper), Paper foil, Plastic edging
Leg, adjustableSteel, Polypropylene plastic, Galvanized
Care
Frame/drawer without front/drawer front/shelf/top for storage module/leg, adjustableWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
Assembly instructions
PLATSA Frame703.309.50HJÄLPA Drawer without front603.309.84HJÄLPA Shelf003.311.61SPILDRA Top for storage module603.317.14LÄTTHET Leg, adjustable203.311.98Advice and care instructions
PLATSA Frame703.309.50KALBÅDEN Drawer front105.516.66SPILDRA Top for storage module603.317.14Disassembly instructions
PLATSA Frame703.309.50
The frame is easy to install by just clicking it together, no tools are needed.
Adjustable feet make it possible to compensate any irregularities in the floor.
With PLATSA home planner tool, you can easily create a solution that is adapted to you, your home and your storage needs.
Knobs and handles are sold separately.
Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Material
FrameFibreboard, Paper foil, Particleboard, Honeycomb structure paper filling (100% recycled)
Drawer without front- Basematerial:
- Steel, Epoxy/polyester powder coating
- Wheel:
- Acetal plastic
- Drawer bottom:
- Fibreboard, Plastic foil
Drawer front/ top for storage moduleParticleboard, Paper foil
ShelfParticle- and fibreboard with honeycomb paper filling (100% recycled paper), Paper foil, Plastic edging
Leg, adjustableSteel, Polypropylene plastic, Galvanized
Care
Frame/drawer without front/drawer front/shelf/top for storage module/leg, adjustableWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
- This furniture must be fixed to the wall with the enclosed wall fastener.WARNING! Tipping hazard – this product must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.
Assembly instructions
PLATSA Frame703.309.50HJÄLPA Drawer without front603.309.84HJÄLPA Shelf003.311.61SPILDRA Top for storage module603.317.14LÄTTHET Leg, adjustable203.311.98Advice and care instructions
PLATSA Frame703.309.50KALBÅDEN Drawer front105.516.66SPILDRA Top for storage module603.317.14Disassembly instructions
PLATSA Frame703.309.50
- 703.309.50
2 × PLATSA
Frame- Width: 41 cm
- Height: 9 cm
- Length: 63 cm
- Weight: 6.70 kg
603.309.842 × HJÄLPA
Drawer without front- Width: 41 cm
- Height: 5 cm
- Length: 61 cm
- Weight: 2.73 kg
105.516.662 × KALBÅDEN
Drawer front- Width: 20 cm
- Height: 2 cm
- Length: 68 cm
- Weight: 1.57 kg
003.311.611 × HJÄLPA
Shelf- Width: 38 cm
- Height: 2 cm
- Length: 59 cm
- Weight: 1.58 kg
603.317.141 × SPILDRA
Top for storage module- Width: 42 cm
- Height: 2 cm
- Length: 69 cm
- Weight: 3.50 kg
203.311.981 × LÄTTHET
Leg, adjustable- Width: 18 cm
- Height: 3 cm
- Length: 24 cm
- Weight: 0.20 kg
This product is made up of more than one component. You can find the details of these components below.
