VALLHORN Wireless motion sensor, smart/white
Price $ 12.99
Batteries are sold separately. We recommend 2 x LADDA rechargeable batteries HR03 AAA 1.2V.
How to get it
It's OK to change your mind
Low Price Guarantee
Price drops? Get the difference back within 90 days with IKEA Family
More ways to pay
Checking payment options...
Product features
- Works with IKEA smarthome products
Use VALLHORN motion sensor anywhere at home – place it in a corner, in the middle of a wall or on a shelf or other flat surface. A simple way to always have light where it’s needed, indoors and outdoors.
Article Number405.043.48
Product details
You can simply make your everyday life easier and safer with VALLHORN wireless motion sensor that reacts to movement and turns your lighting on – both indoors and outdoors.
Powered by two rechargeable LADDA AAA batteries, which are easy to remove and charge and put back in again.
The design with a matte surface makes the motion sensor discreet and easy to place in different rooms in the home.
The motion sensor can be connected to 10 light sources at the same time, and they all work in unison.
You can choose to set the motion sensor to day or night mode and also set it to automatically turn off after 1 or 5 minutes.
By connecting this product to DIRIGERA hub, you get even more out of it and can also control it, together with other smart products, in the IKEA Home smart app.
Designer
IKEA of Sweden
Measurements
- Length: 2 3/4 "
- Width: 2 3/4 "
- Height: 1 1/2 "
Reviews
Waste of timeTaylorDon’t get this. Constantly detects motion when there isn’t any.
Always showing motion detectedScoti bought 2 and hav only set up one so far. The one i set up is constantly detecting motion 100% of the time. Tried 3 different sets of Ikea rechargeable batteries and also reset and re-paired the device 3 times. Same result each time. Not up to IKEA’S normal high standards for smart home devices. Would cost in gas same amount I’d get back for doing a return. Bummer. Beware, looks like many others are having the same issue.
Position this correctly... Apostolos...and will work flawlessly. If not, you'll deal with constant false triggers. I use the recommended rechargeable batteries and haven't had to recharge for over a year. Exceptional battery life especially in comparison to the Ring motion which worked ok but battery life was horrible.
Finally workedKathleenThe first Vollhorn sensor did not work properly. Called IKEA and a replacement was promptly sent. The new one works as it should, Love it!
Works with SmartthingsCliffWorks great outdoors and paired with Samsung Smartthings.
Status always got motionEthanI’ve noticed that the status show motion all the time, even when I’ve set it to off. The status in the app doesn’t change, even though the motion is off.
Never stops detecting motionNealAs others have reported, the motion detector triggers every few minutes despite being in an empty closet. I bought 2, paired with Homey hub and the trigger notifications fill up the log rapidly. Tried varying heights. Not worth 2 cents.
Started out well, most failRalfI have 13 of those. I’m using the IKEA rechargeable batteries. At first 2 did not work properly, but the rest were great. I figured 11 out of 13 wasn’t bad for the price.
WRONG! They’ve started failing on me one after the other (recharging/swapping batteries doesn’t fix anything. Five generate endless motion events and two don’t work at all.
That’s a failure rate of over 50%.
Only works in limited situationsFaeI bought this motion sensor along with 2 smart outlets for overhead lights in my garage. The sensor has some issues. Basic detection works adequately, especially walking left/right from 10 feet or less. From 10 feet to 25 feet, detection is much less reliable. Detection also doesn't work vertically. I set the sensor on the floor about 4' from me sitting on the floor, and it wouldn't trigger with an arm wave nor standing up. I had to pick it up for it to trigger. Triggering takes about 1 second.
Not Nearly As Good as Previous ModelGlennBought to put in a closet to automatically turn on the lights. Did not work nearly as well as the previous model which I had in a smaller closet. Would not detect my hand/arm more than 4 feet away. Moved the older model into the closet and it worked perfectly. Moved this unit to the smaller closet. Works, but misses my motion half of the time. Put a second one by my front door. Not sensitive enough. Have to be within 6-8 feet for it to trigger. Please bring back the prior model!!
Never stops detecting motionMichalThe sensor never stops detecting motion. This is apparently a well-known issue (google it) and IKEA has done nothing to fix it over the last few months.
Works great, usuallyRalfI have 10 of these motion sensors using the Ikea rechargeable batteries. Eight work wonderfully. One was dead on arrival. One works sometimes and other times sees motion every 1-3 minutes regardless of what’s actually happening.
IKEA replaced the DOA unit and the other is almost excusable given how cheap these are; most Zigbee motion sensors are at least twice the price.
This is with Home Assistant using ZHA and SkyConnect.
GREATAaronGot 6 of these to use with Home Assistant. With 1.2V rechargeable batteries, they work well and I have had no issues yet!
Questionable quality controlYutingI recently bought 2 Vallhorn motion sensors and paired them using zigbee2mqtt. One works perfectly. The other one is constantly showing false positives. I have tried different batteries, including the IKEA LADDA, but none of them solved the problem.
Plagued with false positivesYegorThe sensor is plagued with false positives. Resulting in lights turning on and off all night even when there is no motion present. No visible way to adjust sensitivity.
I want to like it, but it's been troubling DavidThe one in my house might be a dud, and the nearly dozen or so I installed in my parent's house have been hit or miss.
I bought one initially as a test, and it worked well enough on the first day for me to buy a lot of them to deploy at my parents house. Around 30 percent of them have wild false positives, but that could be due to the battery type.
I tried the Ikea rechargeable battery on my test motion sensor in hopes of it being the issue. The device works better and the false positives are gone, but it leaves me in the dark all the time. I've had to disable it.
I'm hoping it's just an issue with the first batch, I'd like to exchange it when they're in stock again and see. But it's not convenient for me to return the sensors at my parents house.
Customer reviews
2.9Average rating
267Reviews