SKÅDIS Connector for SKÅDIS pegboards, white
Price $ 2.00
10% off purchase of 10+ select College EssentialsOffer valid from Jul 1, 2025 until Sep 2, 2025
How to get it
More ways to pay
Checking payment options...
These connectors allows you to attach two SKÅDIS pegboards together – on a wall or on the side of a wardrobe. An easy way to turn an unused space into a practical storage space.
Article Number404.776.46
Product details
These connectors allows you to easily attach two SKÅDIS pegboards together to create even more storage space.
Makes it easy to put up two boards vertically - without putting new holes in the wall.
You can easily create a SKÅDIS solution that suits your needs on the side of a wardrobe, combined with Connector for wardrobe, sold separately.
Can only be mounted vertically.
Designer
Eva Lilja Löwenhielm
Measurements
- Width: 1 ¼ "
- Depth: 1/8 "
- Height: 2 ½ "
- Package quantity: 2 pack
Reviews
Did not match upSandraThese connectors did not line up the 2 pegboards I was trying to connect. I had to drill holes so that the screws, included with the pegboard, would line up with the holes on the installation bar and the connectors. Very frustrating!!!
No hardwareAnonymous reviewerI just bought a whole new peboard system and when these arrived they came with nothing to actually attach them to the peg board so now I have 4 packs of this and 2 extra pegboards that I can not use.
Perfect connection DavidGreat for adding additional boards to the Skadis organization wall system.
Doesn't come with any hardwareArsenyI've never seen a company as cheap as IKEA. Would it kill them to include a few screws with this? What's the point of a bracket to attach 2 boards together if there is nothing to secure it with. I ended up sourcing my own hardware and drilled a hole in the board to mount them horizontally so worked ok in the end but be prepared for a lot of DYI.
Only works for one orientation FrancineDisappointing that the connection only works if you have the boards the boards one way, you can't flip them , so be sure to read before you buy
Lacking HardwareMaryWhen you use these to hang the boards, you need more spacers than what you get with the boards to put at the bottom edge because without them, the board doesn't hang flat against the wall. Aside from looking bad, it causes the added shelves to lean forward instead of being level. It seems easy enough to order extra wall spacers but I haven't received any notification that they've been shipped, and I don't see the order on my account.
not usefulMichelleThe connectors did not come with the needed screw attachments. They also only work when putting the peg boards together vertically. The peg board slots long ovals and the holes did not match up when trying to attach the boards horizontally together.
Easy to InstallElizabethPerfect way to connect the 2 peg boards
Makes the job easier if hanging multiple boards in a vertical line.YvetteThese are great for hanging a pegboard below Instead of using the rack as you do on the top one you just screw these into the bottom of the top one and the top of the bottom one. THES CANNOT BE USED TO HANG BOARDS SIDE BY SIDE ONLY TO ATTACH BOTTOM TO TOP PEGBOARD. I hung 8 boards so it was a huge help just being able to attach 4 without messing with the hanging bar. You should have 4 screws and 4 back pieces to attach these and ONLY THE SCREW TO ATTACH TO THE TOP PEGBOARD, YOU DO NOT USE A BACK IT SCREWS RIGHT INTO THE HANGING BAR. I think that’s why people were having a hard time saying they had no screws or cap’s because they must have been used on the top bar. I’m sorry if this is confusing.
A little challengingKarlaThese work well. You get no additional hardware and non is available to purchase. However, if you use the included wall bracket and attach to the bottom, all is sturdy with the hardware you have. If you buy all the accessories, however, gets pricey. For my craft room is prettier than husband’s workshop pegboard
NO HARDWAREKarlathis is a great Idea, but comes with NO hardware and IKEA doesn't sell extra matching hardware!
No hardware to actually use theseAmberGreat in theory, but you need extra space and screws in the back to have it work, and ikea does not provide them, nor do they sell them. So dumb
Ridiculous: these don't come with extra hardware!EileenA good idea in theory, allowing you to attach two pegboards together and hang them from a single rail. BUT these brackets don't come with any extra Skadis screws and spacers, so you will have to take them from somewhere else in the pegboard system to make these work. The obvious choice is the screws and the spacers at the bottom of the pegboard that stop it from just hanging loose against the wall. But having pegboard loose at the bottom lets it flex, thus defeating the whole point of using pegboard in the first place. Ikea needs to either 1. Include 4 each extra screws and spacers packaged with these brackets or 2. Allow you to buy extra screws and spacers as a Skadis accessory. These brackets will be going back to Ikea.
Wow this was a waste of moneyJessThis was stupid purchase. I bought the peg boards system with 6 panels and this didn’t even fit properly. The directions were so bad and so was the product. If I lived closer I would just take them back but it’s not worth it.
Works greatDanWorks great
Very convenient to view thePatVery convenient to view the products and the prices are good
genius!Anonymous reviewerconnect your skadis boards! i realized that i had more to store than one board could hold. so i connected an additional one above my desk, and voilà!
**Brackets don't fit if connecting pegboards SIDE BY SIDE**MadeleineThis bracket ONLY works if you want to connect the pegboards one above/one under the other (with the slots remaining vertical). This bracket WILL NOT work if you're trying to connect them side and side and still have the slots remain vertical. I, personally, was trying to fit them side by side and use for the Milsbo wide greenhouse conversion. But alas, the holes in the bracket aren't far enough apart to connect them that way (which is annoying b/c it doesn't seems like it would have been difficult to design them to fit BOTH ways (since it's only about an 1/8 of an inch off). But I'm also not a bracket engineer. Save yourself the frustration and the 79 cents.
SKADIS Connector for pegboardsElaineI have not used these yet, but they will do the job once I know where the pegboards will be going.
Customer reviews
3.6Average rating
55Reviews
Material
What is steel?
Steel has unique characteristics when it is stretched and shaped since it remains strong. It provides strength to everything from skyscrapers and cars to bed frames and outdoor furniture. The steel industry is moving in the direction of more energy-efficient production and stronger steel qualities. It doesn’t lose any of its properties when recycled and today steel is one of the most recycled materials in the world.