Choose color:
How to get it
Checking availability...Collect 265 points with
It's OK to change your mind
Low Price Guarantee
More ways to pay
All you need to keep the area around the TV organized. You get lots of storage space and relief from unruly cords. Choose a ready-made combination or create your own. This is just one of many, many possibilities.
10 year limited warranty
Material
TV unit- Top panel/ Bottom panel/ Side panel/ Partition:
- Particle- and fiberboard with honeycomb paper filling (100% recycled paper), Paper foil, Paper foil, Plastic edging, Plastic edging, Plastic edging
- Back panel:
- Fiberboard, Paper foil, Plastic foil
ShelfParticleboard, Fiberboard, Paper foil, Plastic edging, Plastic edging, Plastic edging, Paper foil
Drawer frame- Drawer back/ Drawer side:
- Particleboard, Plastic foil
- Drawer bottom:
- Particleboard, Plastic foil, Paper foil
Drawer runner, soft-closingGalvanized steel
Drawer frontParticleboard, High-pressure melamine laminate, Plastic edging
LegSolid wood, Acrylic paint
Support legSteel, Powder coating
Care
TV unit/shelf/drawer frame/drawer runner, soft-closing/leg/support legWipe clean with a damp cloth.
Wipe dry with a clean cloth.
Check regularly that all assembly fastenings are properly tightened and retighten when necessary.
Drawer frontWipe clean with a damp cloth.
Wipe dry with a clean cloth.
10 year guarantee. Read about the terms in the guarantee brochure.
The slightly textured surface on the front KALLVIKEN creates a concrete effect.
It’s easy to keep the cords from your TV and other devices out of sight but close at hand, as there are several cord outlets at the back of the TV bench.
The cable outlet at the top lets cords run down smoothly into the TV bench.
We recommend a TV bench to be a bit wider than the TV placed on it. This TV bench suits a TV up to 45 inches. You can choose a larger TV if it’s not heavier than the specified max load for the bench’s top.
The top panel of the TV bench is intended for a TV with a maximum weight of 35 lbs.
The push-open function requires a space between the frame and the drawer front to allow the drawer to be pushed to open. The small gap is necessary to allow this function and is not a product deviation.
Two drawers with rails included.
Material
TV unit- Top panel/ Bottom panel/ Side panel/ Partition:
- Particle- and fiberboard with honeycomb paper filling (100% recycled paper), Paper foil, Paper foil, Plastic edging, Plastic edging, Plastic edging
- Back panel:
- Fiberboard, Paper foil, Plastic foil
ShelfParticleboard, Fiberboard, Paper foil, Plastic edging, Plastic edging, Plastic edging, Paper foil
Drawer frame- Drawer back/ Drawer side:
- Particleboard, Plastic foil
- Drawer bottom:
- Particleboard, Plastic foil, Paper foil
Drawer runner, soft-closingGalvanized steel
Drawer frontParticleboard, High-pressure melamine laminate, Plastic edging
LegSolid wood, Acrylic paint
Support legSteel, Powder coating
Care
TV unit/shelf/drawer frame/drawer runner, soft-closing/leg/support legWipe clean with a damp cloth.
Wipe dry with a clean cloth.
Check regularly that all assembly fastenings are properly tightened and retighten when necessary.
Drawer frontWipe clean with a damp cloth.
Wipe dry with a clean cloth.
- WARNING! Tipping hazard – this product must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.
This product is made up of more than one component. You can find the details of these components below.
