How do I remove the drawer front from my MAXIMERA or EXCEPTIONELL drawer after attaching it?
At the end of the drawer’s assembly instructions, there is a description of how to remove the drawer front from the drawer. If you no longer have your assembly instructions, you can find them on our website by searching for the drawer’s name or item number in the search field at the top of the homepage. Click on ‘Product Information’ and then ‘Assembly & Documents’ to find the assembly instructions.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
Start by pulling the drawer all the way out on the runners. Firmly grasp the bottom edge of the drawer front (not the sides where the runners are) and lift the drawer upwards and towards you, releasing it from the runners. Then lower the drawer and pull it forward to remove it from the frame.
Read moreWith the help of UTRUSTA fittings, you can install a door or front that is normally mounted with hinges on a drawer instead. We recommend using the fitting with a front that is no more than 60 cm wide and 60 cm high.
Read moreIf your drawer fronts overlap, it may be because the rails or fittings that attach the drawer front are not mounted correctly. Check that the rails are in the correct holes and that the screws for the bottom drawer front fittings are positioned as directed.
Read moreHow you attach a drawer front to your dishwasher depends on both the dishwasher model and the front you have chosen. In the assembly instructions for the VÅGLIG connecting rail, which you need to mount the front onto the dishwasher, you'll find the specific details for your specific dishwasher model.
Read moreIf you want to remove your ENHET drawer front after attaching it, start by loosening the plastic fasteners at the top of the drawer. Then, slide the plastic fittings along the front (do not bend them outward). Next, lift the plastic fittings out of the keyholes. Now, the drawer should be detached from the front. Place the front on the floor, lift the drawer upwards, and tilt it backwards to detach it from the metal brackets.
Read moreFiguring out which inner drawer you should have can be a bit tricky as the size of the drawer fronts for METOD kitchen is named in the drawer front's name by centimeters (WidthxHeight), while the size of the drawers (MAXIMERA and KNIVSHULT) is named by three heights - low, medium and high. To make it simple, you can think that a low drawer is 10 cm high, a medium drawer is 20 cm high, and a high drawer is 30 cm high.
Read more