How do I remove the drawer front from my ENHET drawer after I have attached it?
If you want to remove your ENHET drawer front after attaching it, start by loosening the plastic fasteners at the top of the drawer. Then, slide the plastic fittings along the front (do not bend them outward). Next, lift the plastic fittings out of the keyholes. Now, the drawer should be detached from the front. Place the front on the floor, lift the drawer upwards, and tilt it backwards to detach it from the metal brackets.
At the end of the assembly instructions for the drawer front, you will also find a description of how to remove the drawer front from the drawer. If you no longer have your assembly instructions, you can easily find them on our website by searching for the product name or article number in the search field at the top of the homepage. Then, click on ‘Product Information’ and then ‘Assembly & Documents’ to find the assembly instructions for the ENHET drawer front. Good luck!
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
To remove the drawer from the ENHET frame, first pull the drawer all the way towards you, then lift up the front, pull it a bit further, lower it down, and then remove the drawer.
Read moreAt the end of the drawer’s assembly instructions, there is a description of how to remove the drawer front from the drawer. If you no longer have your assembly instructions, you can find them on our website by searching for the drawer’s name or item number in the search field at the top of the homepage. Click on ‘Product Information’ and then ‘Assembly & Documents’ to find the assembly instructions.
Read moreIf your drawer fronts overlap, it may be because the rails or fittings that attach the drawer front are not mounted correctly. Check that the rails are in the correct holes and that the screws for the bottom drawer front fittings are positioned as directed.
Read moreIf the drawer hits the water trap or adjacent fronts, it’s usually due to incorrect installation. Please check that the drawer runner is positioned correctly and that the bracket between the drawer and the front is mounted according to the instructions - this depends on the drawer’s placement in the cabinet.
Read moreHow you attach a drawer front to your dishwasher depends on both the dishwasher model and the front you have chosen. In the assembly instructions for the VÅGLIG connecting rail, which you need to mount the front onto the dishwasher, you'll find the specific details for your specific dishwasher model.
Read moreIf your doors or drawer fronts are not aligned with each other, you can adjust them by tightening the hinges for the doors or the drawer rails for the drawer fronts. The adjustment ensures that the doors and drawer fronts are at the correct height and position, which can be done both up, down, to the right, and to the left, depending on which part needs fine-tuning.
Read more