Can I place a kitchen drawer under the hob?
Yes, you can! It is possible to have drawers under all the hobs we sell at IKEA.
To protect the hob from underneath, NYTTIG divider for hob at the top of the frame.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
All IKEA appliances have a type label with a four digit number indicating the year and the week the product was manufactured. The label is located inside the appliance, except for our hobs, where it is placed underneath.
Read moreAll our appliances come with a product identification label, known as a type plate. This label provides information such as the serial number, service number, model designation, and other important information.
Read moreIf your drawer fronts overlap, it may be because the rails or fittings that attach the drawer front are not mounted correctly. Check that the rails are in the correct holes and that the screws for the bottom drawer front fittings are positioned as directed.
Read moreFiguring out which inner drawer you should have can be a bit tricky as the size of the drawer fronts for METOD kitchen is named in the drawer front's name by centimeters (WidthxHeight), while the size of the drawers (MAXIMERA and KNIVSHULT) is named by three heights - low, medium and high. To make it simple, you can think that a low drawer is 10 cm high, a medium drawer is 20 cm high, and a high drawer is 30 cm high.
Read moreIf the drawer hits the water trap or adjacent fronts, it’s usually due to incorrect installation. Please check that the drawer runner is positioned correctly and that the bracket between the drawer and the front is mounted according to the instructions - this depends on the drawer’s placement in the cabinet.
Read moreThe RATIONELL drawer is removable, but it requires the correct grip on the front panel to be released easily.
Read more